Oxygen Pressure-Tuned Epitaxy and Optoelectronic Properties of Laser-Deposited ZnO Films on Sapphire
Document Type
Article
Publication Date
12-1-1999
Abstract
Influence of oxygen pressure on the epitaxy, surface morphology, and optoelectronic properties has been studied in the case of ZnO thin films grown on sapphire ~0001! by pulsed-laser deposition. Results of Rutherford backscattering and ion channeling in conjunction with atomic force microscopy clearly indicate that the growth mode, degree of epitaxy, and the defect density strongly depend on the oxygen background pressure during growth. It is also found that the growth mode and the defects strongly influence the electron mobility, free-electron concentration, and the luminescence properties of the ZnO films. By tuning the oxygen pressure during the initial and the final growth stages, smooth and epitaxial ZnO films with high optical quality, high electron mobility, and low background carrier concentration have been obtained. The implication of these results towards the fabrication of superlattices and controlled n- and p-type doping is discussed.
Repository Citation
Choopun, S.,
Vispute, R. D.,
Noch, W.,
Balsamo, A.,
Sharma, R. P.,
Venkatesan, T.,
Iliadis, A.,
& Look, D. C.
(1999). Oxygen Pressure-Tuned Epitaxy and Optoelectronic Properties of Laser-Deposited ZnO Films on Sapphire. Applied Physics Letters, 75 (25), 3947-3949.
https://corescholar.libraries.wright.edu/physics/61
DOI
10.1063/1.125503
Comments
Copyright © 1999, American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The following article appeared in Applied Physics Letters 75.25, and may be found at http://apl.aip.org/resource/1/applab/v75/i25/p3947_s1