Submissions from 2019
Shear Band Formation in Amorphous Materials Under Oscillatoryshear deformation, Nikolai V. Priezjev
Spatiotemporal Analysis of Nonaffine Displacements in Disorderedsolids Sheared Across the Yielding Point, Nikolai V. Priezjev
The Effect of Cryogenic Thermal Cycling on Aging, Rejuvenation, and Mechanical Properties of Metallic Glasses, Nikolai V. Priezjev
The Potential Energy States and Mechanical Properties of Thermally Cycled Binary Glasses, Nikolai V. Priezjev
Structural Relaxation in Amorphous Materials Under Cyclictension-compression Loading, Nikolai V. Priezjev and Pritam K. Jana
The Influence of Complex Thermal Treatment on Mechanical Properties of Amorphous Materials, Nikolai V. Priezjev and Qing-Long Liu
Structural Relaxation of Porous Glasses Due to Internal Stresses and Deformation Under Tensile Loading at Constant Pressure, Nikolai V. Priezjev and Maxim A. Makeev
Structural Transformations During Periodic Deformation of Low-Porosity Amorphous Materials, Nikolai V. Priezjev and Maxim A. Makeev
The Influence of Periodic Shear on Structural Relaxation and Pore Redistribution in Binary Glasses, Nikolai V. Priezjev and Maxim A. Makeev
A Numerical Study of Diffusion of Nanoparticles in a Viscous Medium During Solidification, Kazi M. Rahman, M. Ruhul Amin, and Ahsan Mian
Drop-Weight Impact Behavior of Three-Dimensional Printed Polymer Lattice Structures with Spatially Distributed Vertical Struts, Mohammed A. Rifaie, Ahsan Mian, P. Katiyar, Prasun Majumdar, and Raghavan Srinivasan
Compression Behavior of Three-Dimensional Printed Polymer Lattice Structures, Mohammed A. Rifaie, Ahsan Mian, and Raghavan Srinivasan
Velocimetry Based on Dye Visualization for a Pulsatile Tubing Flow Measurement, Zifeng Yang and Mark Johnson
Film Cooling on the Geometrically Modified Trailing Edge Model of Gas Turbine Blade, Zifeng Yang, Mark Johnson, Natalia Posada, Shichuan Ou, and Rolf Sondergaard
An In-Vitro Flow Study Using an Artificial Circle of Willis Model for Validation of an Existing One-Dimensional Numerical Model, Hongtao Yu, George P. Huang, Bryan R. Ludwig, and Zifeng Yang
Numerical Studies of Hemodynamic Alterations in Pre- and Post-Stenting Cerebral Aneurysms Using a Multiscale Modeling, Hongtao Yu, George P. Huang, Zifeng Yang, and Bryan R. Ludwig
Submissions from 2018
On the Processing of Monolayer C60 Fullerene Films and Their Mechanical Properties, Maher S. Amer and Hasanain Basim Altalebi
On the Evaporation Kinetics of [60] Fullerene in Aromatic Organic Solvents, Maher S. Amer, Wenhu Wang, Kaitlin Kollins, Hasanain Basim Altalebi, and Udo Schwingenschlogl
Defect Engineering, a Path to Make Ultra-High Strength Low-Dimensional Nanostructures, Hamed Attariani, Seyed Emad Rezaei, and Kasra Momeni
Transient Temperature Effects on a High Energy Pulse System Model, Nathan Butt, Mitch Wolff, Rory Roberts, and Soumya Patnaik
A Cryogenic Palletized High Energy Pulse System, Nathan Butt, Mitch Wolff, Rory Roberts, and Scott Thomas
Power/Thermal Interaction Within an Adaptive Turbine Engine, Andrew K. DeSomma, Rory A. Roberts, Mitch Wolff, and Alireza Behbahani
Non-Axisymmetric Endwall Contouring of Front-Loaded High-Lift Low Pressure Turbines, Jacob Dickel, Christopher R. Marks, John Clark, Rolf Sondergaard, and Mitch Wolff
Optimization of a Non-Axisymmetric Endwall Contour for Front-Loaded High-Lift Low Pressure Turbines, Jacob Dickel, Christopher R. Marks, Rolf Sondergaard, and Mitch Wolff
Experimental Investigation of Endwall Flow Control for Front-Loaded Turbine Blades, Nathan Fletcher, Christopher R. Marks, Ryan Petrie, Rolf Sondergaard, and Mitch Wolff
1D Simulation of Blood Flow Characteristics in the Circle of Willis Using THINkS, George P. Huang, Hongtao Yu, Zifeng Yang, Ryan Schwieterman, and Bryan Ludwig
A Comparative Analysis of the Effective and Local Slip Lengths for Liquid Flows Over a Trapped Nanobubble, Haibao Hu, Dezheng Wang, Feng Ren, Luyao Bao, Nikolai V. Priezjev, and Jun Wen
Effect of Heterogeneity in Additively Manufactured Dielectric Structures on RF Response of Microstrip Patch Antennas, Sandeep Keerthi, Aamir E. Hamad, Ahsan Mian, Jallisa Clifford, Prasun Majumdar, Nowrin H. Chamok, and Mohammod Ali
Residual Stress Measurements in Melt Infiltrated SiC/SiC Ceramic Matrix Composites Using Raman Spectroscopy, Kaitlin Kollins, Craig Przybyla, and Maher S. Amer
Hierarchical Hybrid Architectures for Robust and Reusable Nano-devices, Sharmila M. Mukhopadhyay
Leveraging Regional Strengths for STEM Teacher Professional Development: Results from an NSF RET Program Focused on Advanced Manufacturing and Materials, Margaret Pinnell, M Suzanne Franco, Leanne Petry, Ahsan Mian, Brett Doudican, and Raghavan Srinivasan
Mechanical Annealing of Model Glasses: Effects of Strain Amplitude and Temperature, Nikolai V. Priezjev
Slow Relaxation Dynamics in Binary Glasses During Stress-Controlled, Tension-Compression Cyclic Loading, Nikolai V. Priezjev
The Yielding Transition in Periodically Sheared Binary Glasses at Finite Temperature, Nikolai V. Priezjev
A Significant Reduction of Ice Adhesion on Nanostructured Surfaces that Consist of an Array of Single-Walled Carbon Nanotubes: A Molecular Dynamics Simulation Study, Nikolai V. Priezjev, Luyao Bao, Zhaoyuan Huang, Shaoqiang Chen, Kai Luo, and Haibao Hu
Wetting Properties of Structured Interfaces Composed of Surface-Attached Spherical Nanoparticles, Nikolai V. Priezjev and Bishal Bhattarai
The Critical Pressure for Microfiltration of Oil-in-Water Emulsions Using Slotted-Pore Membranes, Nikolai V. Priezjev, Tohid Darvishzadeh, and Bishal Bhattarai
Distributions of Pore Sizes and Atomic Densities in Binary Glasses Revealed by Molecular Dynamics Simulations, Nikolai V. Priezjev and Maxim A. Makeev
Structural Transformations in Porous Glasses Under Mechanical Loading. II. Compression, Nikolai V. Priezjev and Maxim A. Makeev
Structural Transformations in Porous Glasses Under Mechanical Loading. I. Tension, Nikolai V. Priezjev and Maxim A. Makeev
Aligned Carbon Nanotube Arrays Bonded to Solid Graphite Substrates: Thermal Analysis for Future Device Cooling Applications, Betty T. Quinton, Levi Elston, James D. Scofield, and Sharmila M. Mukhopadhyay
Compression Behavior of Three-dimensional Printed Polymer Lattice Structures, Mohammed A. Rifaie, Ahsan Mian, and Raghavan Srinivasan
3D Printed Porous Dielectric Substrates for RF Applications, Vana S. Tummala, Ahsan Mian, Nowrin H. Chamok, Mohammod Ali, Jallisa Clifford, and Prasun Majumdar
Low-Velocity Impact Behavior of Sandwich Structures with Additively Manufactured Polymer Lattice Cores, Andrew J. Turner, Mohammed Al Rifaie, Ahsan Mian, and Raghavan Srinivasan
Unsteady Flow Measurements in a Front Loaded Low Pressure Turbine Passage, Emma Veley, Christopher R. Marks, Rich Anthony, Rolf Sondergaard, and Mitch Wolff
A Multiscale Computational Modeling for Cerebral Blood Flow With Aneurysms and/or Stenoses, Hongtao Yu, George P. Huang, Zifeng Yang, and Bryan R. Ludwig
Submissions from 2017
Defect Engineering: A Path toward Exceeding Perfection, Hamed Attariani, Kasra Momeni, and Kyle R. Adkins
Effects of viscous heating and wall-fluid interaction energy on rate-dependent Slip Behavior of Simple Fluids, Luyao Bao, Nikolai V. Priezjev, Haibao Hu, and Kai Luo
Experimental Investigation of Total Pressure Loss Development in a Highly Loaded Low Pressure Turbine Cascade, Philip Bear, Mitch Wolff, Andreas Gross, Christopher R. Marks, and Rolf Sondergaard
Experimental Investigation of Total Pressure Loss Development in a Highly Loaded Low Pressure Turbine Cascade, Philip Bear, Mitch Wolff, Andreas Gross, Christopher R. Marks, and Rolf Sondergaard
Design of a Transient Variable Cycle Turbine Engine Model for System Integration With Controls, Robert W. Buettner, Rory A. Roberts, Mitch Wolff, and Alireza Behbahani
Tracking Characteristics of Tracer Particles for PIV Measurements in Supersonic Flows, Fang Chen, Hong Liu, Zifeng Yang, and Hui Hu
Dynamic Thermal Management for Aerospace Technology: Review and Outlook, J. Doty, K. Yerkes, L. Byrd, J. Murthy, A. Alleyne, Mitch Wolff, S. Heister, and T. S. Fisher
Wettability Tailoring of Nanotube Carpets: Morphology-chemistry Synergy for Hydrophobic–hydrophilic Cycling, Lymeng He, Anil Karumuri, and Sharmila M. Mukhopadhyay
Four-Terminal Square Piezoresistive Sensors for MEMS Pressure Sensing, Awlad Hossain and Ahsan Mian
Identifying Two Regimes of Slip of Simple Fluids Over Smooth Surfaces with Weak and Strong Wall-Fluid Interaction Energies, Haibao Hu, Luyao Bao, Nikolai V. Priezjev, and Kai Luo
Molecular Dynamics Simulations of the Rotational and Translational Diffusion of a Janus Rod-Shaped Nanoparticle, Ali Kharazmi and Nikolai V. Priezjev
Effect of Laser Power and Scan Speed on Melt Pool Characteristics of Commercially Pure Titanium (CP-Ti), Chandrakanth Kusuma, Sazzad H. Ahmed, Ahsan Mian, and Raghavan Srinivasan
The NSF REU/RET Research on Energy Absorbing 3D Printed Polymer Structures, Benjamin Lewis, Jonah M. Leary, Cynthia Dickman, Walter Petroski, Victoria Bellows, Abbie Morneault, Amanda L. Bucher, Diondra Copland, Ahsan Mian, and Raghavan Srinivasan
Collaborative Community-Based Research Experiences in Materials and Manufacturing (Work in Progress), Leanne Petry, Margaret Pinnell, M. Suzanne Franco, Brett Doudican, Ahsan Mian, and Raghavan Srinivasan
Assessment of a Collaborative NSF RET Program Focused on Advanced Manufacturing and Materials, Margaret Pinnell, Melissa R. Taylor, Ahsan Mian, Sandra M. Preiss, Leanne Petry, and Suzanne Franco
Collective Nonaffine Displacements in Amorphous Materials During Large-Amplitude Oscillatory Shear, Nikolai V. Priezjev
Evolution of the Pore Size Distribution in Sheared Binary Glasses, Nikolai V. Priezjev and Maxim A. Makeev
A Review on Laser Processing in Electronic and MEMS Packaging, Kaysar Rahim and Ahsan Mian
A Numerical Study of Diffusion of Nanoparticles in a Viscous Medium during Solidification, Kazi M. Rahman, M. Ruhul Amin, and Ahsan Mian
Computational Investigation of Secondary Flow Structures in Low Pressure Turbines, Jacob Sharpe, Philip Bear, Mitch Wolff, Chris Marks, and Rolf Sondergaard
Three-Dimensional Printed Dielectric Substrates for Radio Frequency Applications, Vana S. Tummala, Ahsan Mian, Nowrin H. Chamok, Dhruva Poduval, Mohammod Ali, Jallisa Clifford, and Prasun Majumdar
Unsteady Flow Measurements in a Low Pressure Turbine Passage Using Surface Mounted Thin-Film Sensors, Emma Veley, Christopher R. Marks, Rich Anthony, Rolf Sondergaard, Nathan Fletcher, and Mitch Wolff
Optical Flow Method for Blood Flow Velocimetry Based on Digital X-Ray Subtraction Angiography: A Brief Review, Zifeng Yang
Hybrid Particle Image Velocimetry With the Combination of Cross-Correlation and Optical Flow Method, Zifeng Yang and Mark Johnson
Divergence Compensatory Optical Flow Method for Blood Velocimetry, Zifeng Yang, Hongtao Yu, George P. Huang, and Bryan Ludwig
Submissions from 2016
Effect of process parameters on hardness, temperature profile and solidification of different layers processed by direct metal laser sintering (DMLS), Sazzad H. Ahmed, Ahsan Mian, and Raghavan Srinivasan
Effects of Process Parameters on Hardness, Hardness and Solidification Rate of Different Layers Processed Using Direct Metal Laser Sintering, Sazzad H. Ahmed, Ahsan Mian, and Raghavan Srinivasan
Secondary Loss Production Mechanisms in a Low Pressure Turbine Cascade, Philip Bear, Mitch Wolff, Andreas Gross, Christopher R. Marks, and Rolf Sondergaard
The Effect of Profile Contouring on Secondary Flow Structures in Low Pressure Turbines, Philip Bear, Mitch Wolff, Christopher R. Marks, and Rolf Sondergaard
Air Cycle Machine Transient Modeling With Exergy Analysis, Marcus Bracey, Sean Nuzum, Rory A. Roberts, Mitch Wolff, and Jon Zumberge
Dynamic Modeling of a Mixed-Flow Afterburning Turbofan Using Matlab®/Simulink®, Robert W. Buettner, Rory A. Roberts, and Mitch Wolff
Altitude Effects on Solid Oxide Fuel Cell Performance, Venkata Adithya Chakravarthula, Rory A. Roberts, and Mitch Wolff
Impact of High Energy Pulsed Systems on an Aircraft’s Power and Thermal Management System, Adam Donovan, Sean Nuzum, Rory A. Roberts, and Mitch Wolff
Enhanced ECS/Generator Models in an Integrated Air Vehicle Platform, Adam Donovan, Rory Roberts, and J. Mitch Wolff
Atomic Defects Influenced Mechanics of II–VI Nanocrystals, Moumita Ghosh, Siddharth Ghosh, Hamed Attariani, Kasra Momeni, Michael Seibt, and Gowravaram Mohan Rao
Sensitivity Analysis of Planar Piezoresistive Sensors for MEMS Applications, Awlad Hossain and Ahsan Mian
Carbon Nanotube Based Groundwater Remediation: The Case of Trichloroethylene, Kshitij C. Jha, Zhuonan Liu, Hema Vijwani, Mallikarjuna Nadagouda, Sharmila M. Mukhopadhyay, and Mesfin Tsige
Biomechanical Analysis of a Filiform Mechanosensory Hair Socket of Crickets, Kanishka Joshi, Ahsan Mian, and John Miller
Silver Nanoparticles Supported on Carbon Nanotube Carpets: Influence of Surface Functionalization, Anil K. Karumuri, Dhawal P. Oswal, Heather A. Hostetler, and Sharmila M. Mukhopadhyay
Reynolds Number Effects on the Secondary Flow of Profile Contoured Low Pressure Turbines, Christopher R. Marks, Rolf Sondergaard, Philip Bear, and Mitch Wolff
Summer Research and Collaborative Professional Development Experience for NSF RET Teachers in Advanced Materials and Manufacturing, Ahsan Mian, Margaret Pinnell, Leanne Petry, Raghavan Srinivasan, Suzanne Franco, and Melissa Taylor
Microstructural Analysis of Laser Micro-Welds between Copper and Aluminum, Ahsan Mian, C. Taylor, and H. Vijwani
Structural Transformation in Monolayer Materials: A 2D to 1D Transformation, Kasra Momeni, Hamed Attariani, and Richard A. LeSar
Electrochemical Charge Storage in Hierarchical Carbon Manifolds, Rajaram Narayanan, Hema Vijwani, Sharmila M. Mukhopadhyay, and Prabhakar R. Bandaru
Electrochemical Charge Storage in Hierarchical Carbon Manifolds, R. Narayanan, H. Vijwani, and Sharmila M. Mukhopadhyay
Dynamic Modeling at a Vehicle Level of a Cryogenic Based Thermal System for a High Powered System, Sean R. Nuzum, Adam Donovan, Rory A. Roberts, and Mitch Wolff
Carbon-Based Hierarchical Scaffolds for Myoblast Differentiation: Synergy between Nano-Functionalization and Alignment, Akhil Patel, Shilpaa Mukundan, Wenhu Wang, Anil K. Karumuri, Vinayak Sant, Sharmila M. Mukhopadhyay, and Shilpa Sant
Nonaffine Rearrangements of Atoms in Deformed and Quiescent Binary Glasses, Nikolai V. Priezjev
Reversible Plastic Events During Oscillatory Deformation of Amorphous Solids, Nikolai V. Priezjev
Experimental Investigation on Flow Characteristics of a Four-Wing Micro Air Vehicle, Lisong Shi, Chunkit Uy, Shih K. Huang, Zifeng Yang, George P.G. Huang, and Chihyung Wen
The Influence of Normal and Early Vascular Aging on Hemodynamic Characteristics in Cardio-and Cerebrovascular Systems, Hongtao Yu, George P. Huang, Zifeng Yang, Fuyou Liang, and Bryan Ludwig
Submissions from 2015
Multifunctional Nanomaterials for Biomedical Engineering: Unique Properties, Fabrications, and Diverse Applications, Jen-Jie Chieh, Sharmila M. Mukhopadhyay, and Yali Cui
Dynamic Analysis of a Microscale Cricket Filiform Hair Socket, Awlad Hossain and Ahsan Mian
Tuning the Surface Wettability of Carbon Nanotube Carpets in Multiscale Hierarchical Solids, Anil Kumar Karumuri, Lymeng He, and Sharmila M. Mukhopadhyay
