Submissions from 2023
Relaxation Dynamics in Amorphous Alloys Under Asymmetric Cyclic Shear Deformation, Pritam Kumar Jana and Nikolai V. Priezjev
Fatigue Behavior of Cu-Zr Metallic Glasses Under Cyclic Loading, Nikolai Priezjev
Fatigue Failure of Amorphous Alloys Under Cyclic Shear Deformation, Nikolai Priezjev
Submissions from 2022
Developing Scaling Laws to Predict Compressive Mechanical Properties and Determine Geometrical Parameters of Modified BCC Lattice Structures, Hasanain Abdulhadi, Abdalsalam Fadeel, Tahseen A. Alwattar, and Ahsan Mian
Computational Investigation of the Post-yielding Behavior of 3D-Printed Polymer Lattice Structures, Abdalsalam Fadeel, Hasanain Abdulhadi, Golam Newaz, Raghavan Srinivasan, and Ahsan Mian
ABAQUS Plug-In Finite Element Tool for Designing and Analyzing Lattice Cell Structures, Abdalsalam Fadeel, Hasanain Abdulhadi, Raghavan Srinivasan, and Ahsan Mian
Mechanical Annealing and Yielding Transition in Cyclically Sheared Binary Glasses, Nikolai V. Priezjev
Assessment of the Unified Model of Performance: Accuracy of Group-Average and Individualised Alertness Predictions, Nikolai V. Priezjev, Francisco G. Vital-Lopez, and Jaques Reifman
Two Local Slip Modes at the Liquid–Liquid Interface Over Liquid-Infused Surfaces, Liuzhen Ren, Haibao Hu, Luyao Bao, Nikolai V. Priezjev, Jun Wen, and Luo Xie
Advances in Mechanical Metamaterials for Vibration Isolation: A Review, Mohammed Al Rifaie, Hasanain Abdulhadi, and Ahsan Mian
Submissions from 2021
A Computational Approach in Understanding the Low-Velocity Impact Behavior and Damage of 3D-Printed Polymer Lattice Structures, Abdalsalam Fadeel, Hasanain Abdulhadi, Raghavan Srinivasan, and Ahsan Mian
The Effects of Printed Lattice Cell Structure Superstrates on Printed Patch Antennas, Ahsan Mian, Aamir H. Hamad, Sarah D. Longstreth, Adam Archacki, Roberto S. Aga, Carrie M. Bartsch, and Emily M. Heckman
Accessing a Broader Range of Energy States in Metallic Glasses by Variable-Amplitude Oscillatory Shear, Nikolai Priezjev
Shear Band Healing in Amorphous Materials by Small-Amplitude Oscillatory Shear Deformation, Nikolai Priezjev
Accelerated Rejuvenation in Metallic Glasses Subjected to Elastostatic Compression Along Alternating Directions, Nikolai V. Priezjev
Submissions from 2020
Developing an Equivalent Solid Material Model for BCC Lattice Cell Structures Involving Vertical and Horizontal Struts, Tahseen A. Alwattar and Ahsan Mian
The Local Slip Length and Flow Fields Over Nanostructured Superhydrophobic Surfaces, Luyao Bao, Nikolai V. Priezjev, and Haibao Hu
Characteristics of Nanosilver Ink (UTDAg) Microdroplets and Lines on Polyimide During Inkjet Printing at High Stage Velocity, Aamir Hamad, Adam Archacki, and Ahsan Mian
Direct-Write Inkjet Printing of Nanosilver Ink (UTDAg) on PEEK Substrate, Aamir Hamad, Ahsan Mian, and Saiful I. Khondaker
Layer-to-Layer Physical Characteristics and Compression Behavior of 3D Printed Polymer Metastructures Fabricated Using Different Process Parameters, Sivani Patibandla and Ahsan Mian
Cooling Under Applied Stress Rejuvenates Amorphous Alloys and Enhances Their Ductility, Nikolai Priezjev
A Delayed Yielding Transition in Mechanically Annealed Binary Glasses at Finite Temperature, Nikolai V. Priezjev
Alternating Shear Orientation During Cyclic Loading Facilitates Yielding in Amorphous Materials, Nikolai V. Priezjev
Spatiotemporal Analysis of Nonaffine Displacements in Disordered Solids Sheared Across the Yielding Point, Nikolai V. Priezjev
The Effect of Thermal History on the Atomic Structure Andmechanical Properties of Amorphous Alloys, Nikolai V. Priezjev
Additive Manufacturing and How 3D Printing is Fighting COVID-19, Raghavan Srinivasan, Ahsan Mian, Joy Gockel, and Laura M. Luehrmann
Molecular Dynamics Simulation Study of a Polymer Droplet Transport Over an Array of Spherical Nanoparticles, Anish Thomas and Nikolai V. Priezjev
Submissions from 2019
Influence of Material Property Variation on Computationally Calculated Melt Pool Temperature during Laser Melting Process, Sazzad H. Ahmed and Ahsan Mian
Effect of Strut Length and Orientation on Elastic Mechanical Response of Modified Body-Centered Cubic Lattice Structures, Hasanain Basim Altalebi and Ahsan Mian
Development of an Elastic Material Model for BCC Lattice Cell Structures Using Finite Element Analysis and Neural Networks Approaches, Tahseen A. Alwattar and Ahsan Mian
Mechanical Property Enhancement of One-Dimensional Nanostructures Through Defect-Mediated Strain Engineering, Hamed Attariani, Seyed Emad Rezaei, and Kasra Momeni
Effect of Vertical Strut Arrangements on Compression Characteristics of 3D Printed Polymer Lattice Structures: Experimental and Computational Study, Abdalsalam Fadeel, Ahsan Mian, Mohammed Al Rifaie, and Raghavan Srinivasan
Directed Transport of Liquid Droplets on Vibrating Substrates with Asymmetric Corrugations and Patterned Wettability: A Dissipative Particle Dynamics Study, Xinran Geng, Xiaopeng Yu, Luyao Bao, Nikolai V. Priezjev, and Yang Lu
Directed Transport of Liquid Droplets on Vibrating Substrates With Asymmetric Corrugations and Patterned Wettability: A Dissipative Particle Dynamics Study, Xinran Geng, Xiaopeng Yu, Luyao Bao, Nikolai V. Priezjev, and Yang Lu
Radio Frequency Response of Flexible Microstrip Patch Antennas Under Compressive and Bending Loads Using Multiphysics Modeling Approach, Aamir E. Hamad and Ahsan Mian
Accelerated Relaxation in Disordered Solids Under Cyclic Loading With Alternating Shear Orientation, Nikolai V. Priezjev
Aging and Rejuvenation During Elastostatic Loading of Amorphous Alloys, Nikolai V. Priezjev
Atomistic Modeling of Heat Treatment Processes for Tuning the Mechanical Properties of Disordered Solids, Nikolai V. Priezjev
Shear Band Formation in Amorphous Materials Under Oscillatoryshear deformation, Nikolai V. Priezjev
Spatiotemporal Analysis of Nonaffine Displacements in Disorderedsolids Sheared Across the Yielding Point, Nikolai V. Priezjev
The Effect of Cryogenic Thermal Cycling on Aging, Rejuvenation, and Mechanical Properties of Metallic Glasses, Nikolai V. Priezjev
The Potential Energy States and Mechanical Properties of Thermally Cycled Binary Glasses, Nikolai V. Priezjev
Structural Relaxation in Amorphous Materials Under Cyclictension-compression Loading, Nikolai V. Priezjev and Pritam K. Jana
The Influence of Complex Thermal Treatment on Mechanical Properties of Amorphous Materials, Nikolai V. Priezjev and Qing-Long Liu
Structural Relaxation of Porous Glasses Due to Internal Stresses and Deformation Under Tensile Loading at Constant Pressure, Nikolai V. Priezjev and Maxim A. Makeev
Structural Transformations During Periodic Deformation of Low-Porosity Amorphous Materials, Nikolai V. Priezjev and Maxim A. Makeev
The Influence of Periodic Shear on Structural Relaxation and Pore Redistribution in Binary Glasses, Nikolai V. Priezjev and Maxim A. Makeev
A Numerical Study of Diffusion of Nanoparticles in a Viscous Medium During Solidification, Kazi M. Rahman, M. Ruhul Amin, and Ahsan Mian
Drop-Weight Impact Behavior of Three-Dimensional Printed Polymer Lattice Structures with Spatially Distributed Vertical Struts, Mohammed A. Rifaie, Ahsan Mian, P. Katiyar, Prasun Majumdar, and Raghavan Srinivasan
Compression Behavior of Three-Dimensional Printed Polymer Lattice Structures, Mohammed A. Rifaie, Ahsan Mian, and Raghavan Srinivasan
Submissions from 2018
On the Processing of Monolayer C60 Fullerene Films and Their Mechanical Properties, Maher S. Amer and Hasanain Basim Altalebi
On the Evaporation Kinetics of [60] Fullerene in Aromatic Organic Solvents, Maher S. Amer, Wenhu Wang, Kaitlin Kollins, Hasanain Basim Altalebi, and Udo Schwingenschlogl
Defect Engineering, a Path to Make Ultra-High Strength Low-Dimensional Nanostructures, Hamed Attariani, Seyed Emad Rezaei, and Kasra Momeni
A Comparative Analysis of the Effective and Local Slip Lengths for Liquid Flows Over a Trapped Nanobubble, Haibao Hu, Dezheng Wang, Feng Ren, Luyao Bao, Nikolai V. Priezjev, and Jun Wen
Effect of Heterogeneity in Additively Manufactured Dielectric Structures on RF Response of Microstrip Patch Antennas, Sandeep Keerthi, Aamir E. Hamad, Ahsan Mian, Jallisa Clifford, Prasun Majumdar, Nowrin H. Chamok, and Mohammod Ali
Residual Stress Measurements in Melt Infiltrated SiC/SiC Ceramic Matrix Composites Using Raman Spectroscopy, Kaitlin Kollins, Craig Przybyla, and Maher S. Amer
Hierarchical Hybrid Architectures for Robust and Reusable Nano-devices, Sharmila M. Mukhopadhyay
Leveraging Regional Strengths for STEM Teacher Professional Development: Results from an NSF RET Program Focused on Advanced Manufacturing and Materials, Margaret Pinnell, M Suzanne Franco, Leanne Petry, Ahsan Mian, Brett Doudican, and Raghavan Srinivasan
Mechanical Annealing of Model Glasses: Effects of Strain Amplitude and Temperature, Nikolai V. Priezjev
Slow Relaxation Dynamics in Binary Glasses During Stress-Controlled, Tension-Compression Cyclic Loading, Nikolai V. Priezjev
The Yielding Transition in Periodically Sheared Binary Glasses at Finite Temperature, Nikolai V. Priezjev
A Significant Reduction of Ice Adhesion on Nanostructured Surfaces that Consist of an Array of Single-Walled Carbon Nanotubes: A Molecular Dynamics Simulation Study, Nikolai V. Priezjev, Luyao Bao, Zhaoyuan Huang, Shaoqiang Chen, Kai Luo, and Haibao Hu
Wetting Properties of Structured Interfaces Composed of Surface-Attached Spherical Nanoparticles, Nikolai V. Priezjev and Bishal Bhattarai
The Critical Pressure for Microfiltration of Oil-in-Water Emulsions Using Slotted-Pore Membranes, Nikolai V. Priezjev, Tohid Darvishzadeh, and Bishal Bhattarai
Distributions of Pore Sizes and Atomic Densities in Binary Glasses Revealed by Molecular Dynamics Simulations, Nikolai V. Priezjev and Maxim A. Makeev
Structural Transformations in Porous Glasses Under Mechanical Loading. II. Compression, Nikolai V. Priezjev and Maxim A. Makeev
Structural Transformations in Porous Glasses Under Mechanical Loading. I. Tension, Nikolai V. Priezjev and Maxim A. Makeev
Aligned Carbon Nanotube Arrays Bonded to Solid Graphite Substrates: Thermal Analysis for Future Device Cooling Applications, Betty T. Quinton, Levi Elston, James D. Scofield, and Sharmila M. Mukhopadhyay
Compression Behavior of Three-dimensional Printed Polymer Lattice Structures, Mohammed A. Rifaie, Ahsan Mian, and Raghavan Srinivasan
3D Printed Porous Dielectric Substrates for RF Applications, Vana S. Tummala, Ahsan Mian, Nowrin H. Chamok, Mohammod Ali, Jallisa Clifford, and Prasun Majumdar
Low-Velocity Impact Behavior of Sandwich Structures with Additively Manufactured Polymer Lattice Cores, Andrew J. Turner, Mohammed Al Rifaie, Ahsan Mian, and Raghavan Srinivasan
Submissions from 2017
Defect Engineering: A Path toward Exceeding Perfection, Hamed Attariani, Kasra Momeni, and Kyle R. Adkins
Effects of viscous heating and wall-fluid interaction energy on rate-dependent Slip Behavior of Simple Fluids, Luyao Bao, Nikolai V. Priezjev, Haibao Hu, and Kai Luo
Wettability Tailoring of Nanotube Carpets: Morphology-chemistry Synergy for Hydrophobic–hydrophilic Cycling, Lymeng He, Anil Karumuri, and Sharmila M. Mukhopadhyay
Four-Terminal Square Piezoresistive Sensors for MEMS Pressure Sensing, Awlad Hossain and Ahsan Mian
Identifying Two Regimes of Slip of Simple Fluids Over Smooth Surfaces with Weak and Strong Wall-Fluid Interaction Energies, Haibao Hu, Luyao Bao, Nikolai V. Priezjev, and Kai Luo
Molecular Dynamics Simulations of the Rotational and Translational Diffusion of a Janus Rod-Shaped Nanoparticle, Ali Kharazmi and Nikolai V. Priezjev
Effect of Laser Power and Scan Speed on Melt Pool Characteristics of Commercially Pure Titanium (CP-Ti), Chandrakanth Kusuma, Sazzad H. Ahmed, Ahsan Mian, and Raghavan Srinivasan
The NSF REU/RET Research on Energy Absorbing 3D Printed Polymer Structures, Benjamin Lewis, Jonah M. Leary, Cynthia Dickman, Walter Petroski, Victoria Bellows, Abbie Morneault, Amanda L. Bucher, Diondra Copland, Ahsan Mian, and Raghavan Srinivasan
Assessment of a Collaborative NSF RET Program Focused on Advanced Manufacturing and Materials, Margaret Pinnell, Melissa R. Taylor, Ahsan Mian, Sandra M. Preiss, Leanne Petry, and Suzanne Franco
Collective Nonaffine Displacements in Amorphous Materials During Large-Amplitude Oscillatory Shear, Nikolai V. Priezjev
Evolution of the Pore Size Distribution in Sheared Binary Glasses, Nikolai V. Priezjev and Maxim A. Makeev
A Review on Laser Processing in Electronic and MEMS Packaging, Kaysar Rahim and Ahsan Mian
A Numerical Study of Diffusion of Nanoparticles in a Viscous Medium during Solidification, Kazi M. Rahman, M. Ruhul Amin, and Ahsan Mian
Three-Dimensional Printed Dielectric Substrates for Radio Frequency Applications, Vana S. Tummala, Ahsan Mian, Nowrin H. Chamok, Dhruva Poduval, Mohammod Ali, Jallisa Clifford, and Prasun Majumdar
Submissions from 2016
Effect of process parameters on hardness, temperature profile and solidification of different layers processed by direct metal laser sintering (DMLS), Sazzad H. Ahmed, Ahsan Mian, and Raghavan Srinivasan
Effects of Process Parameters on Hardness, Hardness and Solidification Rate of Different Layers Processed Using Direct Metal Laser Sintering, Sazzad H. Ahmed, Ahsan Mian, and Raghavan Srinivasan
Enhanced ECS/Generator Models in an Integrated Air Vehicle Platform, Adam Donovan, Rory Roberts, and J. Mitch Wolff
Atomic Defects Influenced Mechanics of II–VI Nanocrystals, Moumita Ghosh, Siddharth Ghosh, Hamed Attariani, Kasra Momeni, Michael Seibt, and Gowravaram Mohan Rao
Sensitivity Analysis of Planar Piezoresistive Sensors for MEMS Applications, Awlad Hossain and Ahsan Mian
Carbon Nanotube Based Groundwater Remediation: The Case of Trichloroethylene, Kshitij C. Jha, Zhuonan Liu, Hema Vijwani, Mallikarjuna Nadagouda, Sharmila M. Mukhopadhyay, and Mesfin Tsige
Biomechanical Analysis of a Filiform Mechanosensory Hair Socket of Crickets, Kanishka Joshi, Ahsan Mian, and John Miller
Silver Nanoparticles Supported on Carbon Nanotube Carpets: Influence of Surface Functionalization, Anil K. Karumuri, Dhawal P. Oswal, Heather A. Hostetler, and Sharmila M. Mukhopadhyay
Summer Research and Collaborative Professional Development Experience for NSF RET Teachers in Advanced Materials and Manufacturing, Ahsan Mian, Margaret Pinnell, Leanne Petry, Raghavan Srinivasan, Suzanne Franco, and Melissa Taylor
Microstructural Analysis of Laser Micro-Welds between Copper and Aluminum, Ahsan Mian, C. Taylor, and H. Vijwani
Structural Transformation in Monolayer Materials: A 2D to 1D Transformation, Kasra Momeni, Hamed Attariani, and Richard A. LeSar
Electrochemical Charge Storage in Hierarchical Carbon Manifolds, Rajaram Narayanan, Hema Vijwani, Sharmila M. Mukhopadhyay, and Prabhakar R. Bandaru
Electrochemical Charge Storage in Hierarchical Carbon Manifolds, R. Narayanan, H. Vijwani, and Sharmila M. Mukhopadhyay
Carbon-Based Hierarchical Scaffolds for Myoblast Differentiation: Synergy between Nano-Functionalization and Alignment, Akhil Patel, Shilpaa Mukundan, Wenhu Wang, Anil K. Karumuri, Vinayak Sant, Sharmila M. Mukhopadhyay, and Shilpa Sant
Nonaffine Rearrangements of Atoms in Deformed and Quiescent Binary Glasses, Nikolai V. Priezjev
