Submissions from 2026
Utilizing Optimization Tools for Profile Contouring to Reduce Endwall Losses, Bryant R.D. Burton, John P. Clark, Christopher R. Marks, and Mitch Wolff
Comparison of Quality Prediction Methods for Transient Two-Phase Systems in High-Speed Applications, Zachary J. Carner, Abdeel J. Roman, Mitch Wolff, and C. Taber Wanstall
A Comprehensive Analysis of Triply Periodic Minimal Surface Structures Applied to Additively Manufactured Conformal Heat Exchangers for High-Speed Applications, Nathan Lewan, Mitch Wolff, Abdeel J. Roman, Zachary J. Carner, Maj John Brewer, and Capt Tanner Barber
Using Unsupervised Machine Learning to Experimentally Categorize Separation on Low-Pressure Turbine Blades, Aaron B. Suter, Christopher R. Marks, Jared N. Kerestes, and Mitch Wolff
Ignition Study of a Full-Annular Small-Scale Combustor, Bryce A. Ullman, Brendan T. Paxton, Brent A. Rankin, and Mitch Wolff
Submissions from 2025
Inception and Rupture of Intracranial Aneurysms with Daughter Sacs: A Comprehensive Hemodynamics Analysis, Luke Bramlage, Hang Yi, Zifeng Yang, and Bryan Ludwig
1D Network Simulation of Blood Flow in the Circle of Willis, P. G. Huang, Hongtao Yu, Zifeng Yang, and Bryan Ludwig
Implementation of Actuation Subsystems in a 6DOF High-Speed Vehicle Simulation, Jacob H. Jadischke, José Camberos, Ramana Grandhi, and Mitch Wolff
On the Use of Machine Learning To Classify Laminar Separation Bubbles, Jared Kerestes, Christopher Marks, Mitch Wolff, and John Clark
Quality Prediction Applied to Transient Two-Phase Thermal Management Systems, Abdeel J. Roman, Zachary Carner, C. Taber Wanstall, and Mitch Wolff
Actuation Frequencies for Laminar Separation Control of an Eppler 387 Airfoil, Vincent R. Sheeler, Mitch Wolff, and Christopher R. Marks
A Polar Turbulence Invariant Map With Applicability to Realisable Machine Learning Turbulence Models, James G. Wnek, Christopher Schrock, Eric M. Wolf, and Mitch Wolff
Hemodynamically Induced Creation and Rupture of Secondary Intracranial Aneurysms: A Discriminant Study Using Anatomical and Phantom Models, Zifeng Yang, Hang Yi, and Bryan R. Ludwig
In Silico Study on Effects of Temperature Change on Hemodynamics of Arteriovenous Fistula and Risk of Postoperative Complication, Dashun Ye, Zifeng Yang, Hang Yi, Xiaohua Liu, Hongda Bao, Di Sun, Huinan Yang, Andy L. Olivares, Oscar Camara, and Jun Yang
Creating Blood Analogs to Mimic Steady-State Non-Newtonian Shear-Thinning Characteristics Under Various Thermal Conditions, Hang Yi, Alexander Wang, Christopher Wang, Jared Chong, Chungyiu Ma, Luke Bramlage, Bryan Ludwig, and Zifeng Yang
Submissions from 2024
Two-Phase Refrigerant R-134a Void Fraction and Quality Correlation Study, Zachary Carner, Mitch Wolff, and Abdeel J. Román
A Conceptual Design Workflow for Producing a Controllable 6DOF Simulation of a High-Speed Vehicle, Jacob H. Jadischke, José Camberos, Ramana Grandhi, Danielle Hollon, and Mitch Wolff
Generating Blood Analog for Laser Induced Fluorescent Particle Image Velocimetry, Chungyiu Ma, Jared Chong, Hang Yi, Zifeng Yang, Luke Bramlage, and Bryan Ludwig
Quality Prediction Applied to Transient TwoPhase Thermal Management Systems, Abdeel J. Roman, Zachary Carner, Mitch Wolff, and Taber Wanstall
Experimental Evaluation of High Lift, High Work LPT Blades in a Transonic Cascade, Ryan R. Sauder, Mitch Wolff, Gloria E. Savela, Geoffery B. Norris, Andrew T. Lethander, Natalia A. Posada, and John P. Clark
Numerical Investigation of Supersonic Flow over a Wedge by Solving 2D Euler Equations Utilizing the Steger–Warming Flux Vector Splitting (FVS) Scheme, Mitch Wolff, Hashim H. Abada, and Hussein Awad Kurdi Awad Kurdi Saad
Dual Airfoil Testing System, Zifeng Yang, Collin Charvat, Jack Stafford, Kyle Mathews, and Logan Kelly
3D Flow Field Quantification in an Artery Model Using Optical Flow Method Based on Simulated Multi-Angle Angiography, Zifeng Yang, Hang Yi, Luke Bramlage, and Bryan Ludwig
Using DFT on Ultrasound Measurements To Determine Patient-Specific Blood Flow Boundary Conditions for Computational Hemodynamics of Intracranial Aneurysms, Hang Yi, Zifeng Yang, Luke Bramlage, and Bryan Ludwig
Experimental Study of Drag Characteristics and Dust Removal Performance of a Hybrid Wet-Filter Precipitator, Hang Yi, Zifeng Yang, Deqiang Chang, Xinjiao Tian, and Jingxian Liu
Deep Learning based Optical Flow Analysis of High-speed Flows, Daniel H. Zhang and Zifeng Yang
Deep learning-based optical flow analysis of two-dimensional Rayleigh scattering imaging of high-speed flows, Daniel Zhang and Zifeng Yang
Submissions from 2023
Comparisons of Configuration and Hemodynamics in Cerebral Arteries and Aneurysms Between a Rare Pair of Monozygotic Twins, Luke Bramlage, Hang Yi, Zifeng Yang, and Bryan Ludwig
Two-Phase R-134a Void Fraction Pulsed Power Study, Zachary Carner, Mitch Wolff, and Abdeel J. Roman
Exergy Analysis and Optimization of a Scramjet Engine, Francis A. Centlivre, Mitch Wolff, Timothy Eymann, Mark Hagenmaier, and José Camberos
Direct Ink Write Processing of Signal Crossovers Using Aerosol Jet Printing Method, Lucas Clark, Fahima Ouchen, Thomas Taylor, Emily Heckman, Carrie Bartsch, and Ahsan Mian
Experimental Investigation of the Flow Control Over an Airfoil With Owl-Inspired Trailing-Edge Modification: On the Material, Length, and Spacing Sensitivity, Zhi Deng, Zifeng Yang, and Wen Li Chen
A Non-Iterative Solution for Frost Growth on Flat Surfaces, Danielle Hollon, Nicholas Truster, Larry Byrd, Abdeel Román, and Mitch Wolff
Optimal Route Planning and Power Management for Hybrid UAV Using A* Algorithm, Jacob H. Jadischk, Mitch Wolff, Jon Zumberge, Brandon Hencey, and Anhtuan Ngo
Relaxation Dynamics in Amorphous Alloys Under Asymmetric Cyclic Shear Deformation, Pritam Kumar Jana and Nikolai V. Priezjev
Les Modeling of High-Lift High-Work LPT Blades: Part II - Validation and Application, Jared Kerestes, Christopher Marks, John Clark, Mitch Wolff, Ron Ho Ni, and Nathan Fletcher
High-Lift High-Work LPT Blades and Separation, Jared N. Kerestes, Christopher R. Marks, John P. Clark, Mitch Wolff, Ron Ho Ni, and Nathan Fletcher
Characterization of Printed Silver Thin Films Sintered by a Scanning Laser Technique, William A. Metzger, Laura Davidson, Fahima Ouchen, Roberto Aga, Twinkle Pandhi, Carrie Bartsch, Emily Heckman, and Ahsan Mian
Fatigue Behavior of Cu-Zr Metallic Glasses Under Cyclic Loading, Nikolai Priezjev
Fatigue Failure of Amorphous Alloys Under Cyclic Shear Deformation, Nikolai Priezjev
Hemodynamic Investigations in Intracranial Aneurysms: A Commentary, Hang Yi, Mark Johnson, Luke Bramlage, Zifeng Yang, and Bryan Ludwig
Morphology and Hemodynamics of Cerebral Arteries and Aneurysms in a Rare Pair of Monozygotic Twins, Hang Yi, Zifeng Yang, Luke C. Bramlage, and Bryan R. Ludwig
Pathophysiology of Intracranial Aneurysms in Monozygotic Twins: A Rare Case Study From Hemodynamic Perspectives, Hang Yi, Zifeng Yang, Luke Bramlage, and Bryan Ludwig
Submissions from 2022
Developing Scaling Laws to Predict Compressive Mechanical Properties and Determine Geometrical Parameters of Modified BCC Lattice Structures, Hasanain Abdulhadi, Abdalsalam Fadeel, Tahseen A. Alwattar, and Ahsan Mian
New Advances in Fluid–Structure Interaction, Wenli Chen, Zifeng Yang, Gang Hu, Haiquan Jing, and Junlei Wang
The Control Mechanism of the Soft Trailing Fringe on the Flow Characteristics Over an Airfoil, Zhi Deng, Wen Li Chen, and Zifeng Yang
Computational Investigation of the Post-yielding Behavior of 3D-Printed Polymer Lattice Structures, Abdalsalam Fadeel, Hasanain Abdulhadi, Golam Newaz, Raghavan Srinivasan, and Ahsan Mian
ABAQUS Plug-In Finite Element Tool for Designing and Analyzing Lattice Cell Structures, Abdalsalam Fadeel, Hasanain Abdulhadi, Raghavan Srinivasan, and Ahsan Mian
Mechanical Annealing and Yielding Transition in Cyclically Sheared Binary Glasses, Nikolai V. Priezjev
Assessment of the Unified Model of Performance: Accuracy of Group-Average and Individualised Alertness Predictions, Nikolai V. Priezjev, Francisco G. Vital-Lopez, and Jaques Reifman
Two Local Slip Modes at the Liquid–Liquid Interface Over Liquid-Infused Surfaces, Liuzhen Ren, Haibao Hu, Luyao Bao, Nikolai V. Priezjev, Jun Wen, and Luo Xie
Advances in Mechanical Metamaterials for Vibration Isolation: A Review, Mohammed Al Rifaie, Hasanain Abdulhadi, and Ahsan Mian
Extensional Study of Optical-Flow Enhanced Hybrid Piv Method for Dual-Plane Stereoscopic Piv Measurement, Sirui Wang, Jianyi Zheng, Lei Li, Xi Xia, Xiao Han, Chi Zhang, Fei Qi, and Zifeng Yang
Evolution Characteristics of 3D Vortex Structures in Stratified Swirling Flames Studied by Dual-Plane Stereoscopic PIV, Sirui Wang, Jianyi Zheng, Lei Li, Zifeng Yang, Xi Xia, Chen Fu, Yi Gao, Xunchen Liu, Xiao Han, Chi Zhang, and Fei Qi
Effects of Pulsatile Flow Rate and Shunt Ratio in Bifurcated Distal Arteries on Hemodynamic Characteristics Involved in Two Patient-Specific Internal Carotid Artery Sidewall Aneurysms: A Numerical Study, Hang Yi, Mark Johnson, Luke C. Bramlage, Bryan Ludwig, and Zifeng Yang
Developing an In Vitro Validated 3D In Silico Internal Carotid Artery Sidewall Aneurysm Model, Hang Yi, Zifeng Yang, Mark Johnson, Luke Bramlage, and Bryan Ludwig
Hemodynamic Characteristics in a Cerebral Aneurysm Model Using Non-Newtonian Blood Analogues, Hang Yi, Zifeng Yang, Mark Johnson, Luke Bramlage, and Bryan Ludwig
Effect of the Extended Rigid Flapping Trailing Edge Fringe on an S833 Airfoil, Hongtao Yu and Zifeng Yang
Experimental Investigations on Coherent Flow Structures in Acoustically Excited Swirling Flames Using Temporally-Separated Dual-Plane Stereo-PIV, Jianyi Zheng, Sirui Wang, Zifeng Yang, Lei Li, Guoqing Wang, Yi Gao, Xunchen Liu, and Fei Qi
Submissions from 2021
Computational Inlet Swirl Distortion Investigation of a High-Speed Compressor, Marcus J. Acton, Mitch Wolff, and Michael G. List
Active Control of Flow Structure and Unsteady Aerodynamic Force of Box Girder With Leading-Edge Suction and Trailing-Edge Jet, Guan Bin Chen, Wen Li Chen, Dong Lai Gao, and Zi Feng Yang
A Computational Approach in Understanding the Low-Velocity Impact Behavior and Damage of 3D-Printed Polymer Lattice Structures, Abdalsalam Fadeel, Hasanain Abdulhadi, Raghavan Srinivasan, and Ahsan Mian
Application of Three-Dimensional Diagnostics on the Direct-Current Electric-Field Assisted Combustion, Hecong Liu, Zifeng Yang, and Weiwei Cai
The Effects of Printed Lattice Cell Structure Superstrates on Printed Patch Antennas, Ahsan Mian, Aamir H. Hamad, Sarah D. Longstreth, Adam Archacki, Roberto S. Aga, Carrie M. Bartsch, and Emily M. Heckman
Accessing a Broader Range of Energy States in Metallic Glasses by Variable-Amplitude Oscillatory Shear, Nikolai Priezjev
Molecular Dynamics Simulation of a Polymer Droplet Transport Over Spherical Nanoparticles, Nikolai Priezjev
Shear Band Healing in Amorphous Materials by Small-Amplitude Oscillatory Shear Deformation, Nikolai Priezjev
Accelerated Rejuvenation in Metallic Glasses Subjected to Elastostatic Compression Along Alternating Directions, Nikolai V. Priezjev
Turbine Passage Vortex Response to Upstream Periodic Disturbances, Mitchell Scott, Christopher R. Marks, Nathan Fletcher, and Mitch Wolff
Submissions from 2020
Developing an Equivalent Solid Material Model for BCC Lattice Cell Structures Involving Vertical and Horizontal Struts, Tahseen A. Alwattar and Ahsan Mian
The Local Slip Length and Flow Fields Over Nanostructured Superhydrophobic Surfaces, Luyao Bao, Nikolai V. Priezjev, and Haibao Hu
Turbine Secondary Flow Response to Upstream Periodic Unsteadiness, Nathan Fletcher, Mitch Wolff, and Christopher R. Marks
Characteristics of Nanosilver Ink (UTDAg) Microdroplets and Lines on Polyimide During Inkjet Printing at High Stage Velocity, Aamir Hamad, Adam Archacki, and Ahsan Mian
Direct-Write Inkjet Printing of Nanosilver Ink (UTDAg) on PEEK Substrate, Aamir Hamad, Ahsan Mian, and Saiful I. Khondaker
Layer-to-Layer Physical Characteristics and Compression Behavior of 3D Printed Polymer Metastructures Fabricated Using Different Process Parameters, Sivani Patibandla and Ahsan Mian
Experimental Validation of a Combined Thermal Management and Power Generation System Using a Multi-Mode Rankine Cycle, Nathaniel Payne, Rory Roberts, Mitch Wolff, Jared McCoppin, and Levi Elston
Cooling Under Applied Stress Rejuvenates Amorphous Alloys and Enhances Their Ductility, Nikolai Priezjev
A Delayed Yielding Transition in Mechanically Annealed Binary Glasses at Finite Temperature, Nikolai V. Priezjev
Alternating Shear Orientation During Cyclic Loading Facilitates Yielding in Amorphous Materials, Nikolai V. Priezjev
Spatiotemporal Analysis of Nonaffine Displacements in Disordered Solids Sheared Across the Yielding Point, Nikolai V. Priezjev
The Effect of Thermal History on the Atomic Structure Andmechanical Properties of Amorphous Alloys, Nikolai V. Priezjev
Additive Manufacturing and How 3D Printing is Fighting COVID-19, Raghavan Srinivasan, Ahsan Mian, Joy Gockel, and Laura M. Luehrmann
Molecular Dynamics Simulation Study of a Polymer Droplet Transport Over an Array of Spherical Nanoparticles, Anish Thomas and Nikolai V. Priezjev
20 kHz Dual-Plane Stereo-PIV Measurements on a Swirling Flame Using a Two-Legged Burst-Mode Laser, Zifeng Yang, Sirui Wang, Jianyi Zheng, Lei Li, Xunchen Liu, Yi Gao, and Fei Qi
A Numerical Simulation on the Airfoil S833 Equipped With Flapping Trailing Edge Fringes, H. Yu and Zifeng Yang
Submissions from 2019
Influence of Material Property Variation on Computationally Calculated Melt Pool Temperature during Laser Melting Process, Sazzad H. Ahmed and Ahsan Mian
Effect of Strut Length and Orientation on Elastic Mechanical Response of Modified Body-Centered Cubic Lattice Structures, Hasanain Basim Altalebi and Ahsan Mian
Development of an Elastic Material Model for BCC Lattice Cell Structures Using Finite Element Analysis and Neural Networks Approaches, Tahseen A. Alwattar and Ahsan Mian
Mechanical Property Enhancement of One-Dimensional Nanostructures Through Defect-Mediated Strain Engineering, Hamed Attariani, Seyed Emad Rezaei, and Kasra Momeni
Periodic Forcing of an Endwall Vortex in a Highly Loaded Low Pressure Turbine, Molly Donovan, Mitch Wolff, Christopher R. Marks, Rolf Sondergaard, and Emma Veley
Effect of Vertical Strut Arrangements on Compression Characteristics of 3D Printed Polymer Lattice Structures: Experimental and Computational Study, Abdalsalam Fadeel, Ahsan Mian, Mohammed Al Rifaie, and Raghavan Srinivasan
Characterization of Periodic Unsteadiness Generator for Secondary Flow Studies, Nathan Fletcher, Christopher R. Marks, Rolf Sondergaard, and Mitch Wolff
Directed Transport of Liquid Droplets on Vibrating Substrates with Asymmetric Corrugations and Patterned Wettability: A Dissipative Particle Dynamics Study, Xinran Geng, Xiaopeng Yu, Luyao Bao, Nikolai V. Priezjev, and Yang Lu
Directed Transport of Liquid Droplets on Vibrating Substrates With Asymmetric Corrugations and Patterned Wettability: A Dissipative Particle Dynamics Study, Xinran Geng, Xiaopeng Yu, Luyao Bao, Nikolai V. Priezjev, and Yang Lu
Radio Frequency Response of Flexible Microstrip Patch Antennas Under Compressive and Bending Loads Using Multiphysics Modeling Approach, Aamir E. Hamad and Ahsan Mian
Improved Loss Modeling for a 2D Throughflow Compressor Design Code, Troy J. Lanchman, Michael List, and Mitch Wolff
Unsteady Flow Physics in the Trailing Edge Region of a Transonic Turbine Cascade, Natalia Posada, John Clark, Andrew Lethander, and Mitch Wolff
Accelerated Relaxation in Disordered Solids Under Cyclic Loading With Alternating Shear Orientation, Nikolai V. Priezjev
Aging and Rejuvenation During Elastostatic Loading of Amorphous Alloys, Nikolai V. Priezjev
Atomistic Modeling of Heat Treatment Processes for Tuning the Mechanical Properties of Disordered Solids, Nikolai V. Priezjev
