Submissions from 1996
Development of Active Suspensions Using Velocity Feedback, Junghsen Lieh
Optimal Control Design for Second-Order Systems, Junghsen Lieh and Vipperla B. Venkayya
Stability of a Flexible Wheelset for High Speed Rail Vehicles With Constant and Varying Parameters, Junghsen Lieh and Jie Yin
Stability of Elasto-Damper-Coupled Wheelset for High-Speed Rail Vehicles, Junghsen Lieh and Jie Yin
Optimization of Microstructure Development: Application to Hot Metal Extrusion, James C. Malas III, Anil Chaudhary, W. M. Mullins, Enrique A. Medina, S. Venugopal, S. C. Medeiros, R. Dennis Irwin, W. Garth Frazier, and Raghavan Srinivasan
Optimization of Microstructure Development: Application to Hot Metal Extrusion, Enrique A. Medina, S. Venugopal, W. Garth Frazier, S. C. Medeiros, W. M. Mullins, Anil Chaudhary, R. Dennis Irwin, Raghavan Srinivasan, and James C. Malas III
Design, Calibration, and Application of Optimized (111) Silicon Stress Sensing Test Chips, Ahsan Mian, Robert A. Cordes, B. M. Wilamowski, S. Lin, Jeffrey C. Suhling, and Richard C. Jaeger
Experimental Measurement of Fiber/Fiber Interaction using Micro Raman Spectroscopy, Linda S. Schadler, Maher S. Amer, and B. Iskandarani
Isothermal Deformation of Gamma Titanium Aluminide, Raghavan Srinivasan, J. P. Singh, E. Tuval, and Isaac Weiss
Symbolic Finite Element Modeling of Structural Systems, Srinivas Tummarakota and Junghsen Lieh
Fibre Interactions in Two-Dimensional Composites by Micro-Raman Spectroscopy, H. D. Wagner, Maher S. Amer, and Linda S. Schadler
Role of Halogen Dopants in Ag-Y1Ba2Cu3O(7-x) Composites, Chao Wei and Sharmila M. Mukhopadhyay
A Systems Approach to Flame Retardancy and Comments on Mode of Action, Edward D. Weil, Weiming Zhu, Navin Patel, and Sharmila M. Mukhopadhyay
Bulk Deformation of Ti-6.8Mo-4.5Fe-1.5Al (Timetal LCB) Alloy, Isaac Weiss, Raghavan Srinivasan, Mohammad Saqib, N. Stefansson, A. G. Jackson, and S. R. LeClair
Intumescent flame-retardant system of phosphates and 5,5,5′,5′,5″,5″-hexamethyltris (1,3,2-dioxaphosphorinanemethan)amine 2,2′,2″- trioxide for polyolefins, Weiming Zhu, Edward D. Weil, and Sharmila M. Mukhopadhyay
Submissions from 1995
Environmental Degradation of the Interface in Graphite/Epoxy Single Filament Composites Measured using Raman Spectroscopy: Effect of Hydrothermal and Thermal Exposure at 100°C, Maher S. Amer, M. J. Koczak, and Linda S. Schadler
Metallization of Electronic Polymers: A Comparative Study of Polyvinylidene Fluoride, Polytetrafluoroethylene, and Polyethylene, Tim C.S. Chen and Sharmila M. Mukhopadhyay
Relationship of the Second Order Nonlinear Optical Coefficient to Bandgap in Inorganic Non-Centrosymmetric Crystals, A. G. Jackson, M. Ohmer, and S. R. Leclair
Window-On-Europe, S. R. LeClair and A. G. Jackson
The Development of an Electric Car, Junghsen Lieh
Simulation of Dynamic Truck Loading on Pavements Using Measured Road Roughness, Junghsen Lieh and Weigang Qi
Study of the Interface Behavior of SiCf/Si3N4 Composites Using a 3-D Unit Cell Model, H. Mahfuz, Ahsan Mian, S. Jeelani, U. Vaidya, and T. Brown
Prediction of Fiber-Matrix Interface Failure Due to Longitudinal Tensile Loading using Finite Element Methods, H. Mahfuz, Ahsan Mian, U. Vaidya, and T. Brown
Non-Isothermal Deformation of Gamma Titanium Aluminide, B. Mohan, Raghavan Srinivasan, and Isaac Weiss
Surface Chemical states of Barium Titanate: Influence of Sample Processing, Sharmila M. Mukhopadhyay and Tim C. S. Chen
Interaction of PbZrxTi(1-x)O3 (PZT) with Ni: Role of Surface Defects, Sharmila M. Mukhopadhyay and Tim C.S. Chen
Interactions at the Superconductor-Metal Interface, Sharmila M. Mukhopadhyay, Chao Wei, and Tim C.S. Chen
Environmental Effects on Interfacial Behavior in Graphite/Epoxy Single-Fiber and Multi-Fibers Composites, Linda S. Schadler, M. J. Koczak, and Maher S. Amer
Isothermal Deformation of Gamma Titanium Aluminide, J. P. Singh, E. Tuval, Isaac Weiss, and Raghavan Srinivasan
Ductile Phase Toughening in the Nb-10Si In-Situ Composite, Raghavan Srinivasan and Isaac Weiss
Submissions from 1994
Environmental Degradation Studies of the Interface in Single-Filament Graphite/Epoxy Composites Using Laser Raman Spectroscopy, Maher S. Amer, M. J. Koczak, C. Galiotis, and Linda S. Schadler
Integration of Simulation and Analysis of Electron Diffraction Patterns, A. G. Jackson and S. R. LeClair
A Multibody Dynamics Program for Truck Simulation, Junghsen Lieh
Computer-Oriented Closed-Form Algorithm for Constrained Multibody Dynamics for Robotics Applications, Junghsen Lieh
Dynamic Modeling of a Slider-Crank Mechanism With Coupler and Joint Flexibility, Junghsen Lieh
Separated-Form Equations of Motion of Controlled Flexible Multibody Systems, Junghsen Lieh
Biomechanics of Wheelchair Propulsion During Fatigue, Mary M. Rodgers, G. William Gayle, Stephen F. Figoni, Masuo Kobayashi, Junghsen Lieh, and Roger M. Glaser
Intermediate Shapes in Closed-Die Forging By the Backward Deformation Optimization Method (BDOM), Raghavan Srinivasan, G. H. K. Reddy, S. S. Kumar, and Ramana V. Grandhi
Deformation Processing of the Nb-10 a/o Si In-Situ Composite, Raghavan Srinivasan, M. Thirukkonda, and Isaac Weiss
High Temperature Deformation of Nb-10 a/o Si In-Situ Composite, M. Thirukkonda, Raghavan Srinivasan, and Isaac Weiss
Instability and Flow Localization During Compression of a Flow Softening Material, M. Thlrukkonda, Raghavan Srinivasan, and Isaac Weiss
Effect of Deformation Processing on Mechanical Properties of Nb-10 a/o Si In-situ Composite, Isaac Weiss, M. Thirukkonda, and Raghavan Srinivasan
Submissions from 1993
Concurrent Engineering Tools for Forging Die and Process Design, Ramana V. Grandhi and Raghavan Srinivasan
Optimum Design of Forging Die Shapes Using Nonlinear Finite Element Analysis, C. S. Han, Ramana V. Grandhi, and Raghavan Srinivasan
Study of Parametric Stability of Railway Vehicles, I. Haque and Junghsen Lieh
Identification of the L6o Phase in A γ-1bTi-1bAl-1bNb Alloy, A. G. Jackson
Development of an Automated Analyzer for TEM Diffraction Patterns, A. G. Jackson, J. Park, D. Wood, and S. R. LeClair
Formulation of Finite Element Equations for Structural Systems Using Virtual Work, Junghsen Lieh
Frequency Analysis of Active Suspensions With Optimal Damping Control Using Second-Order Models, Junghsen Lieh
Semiactive Damping Control of Vibrations in Automobiles, Junghsen Lieh
The Effect of Bandwidth of Semiactive Dampers on Vehicle Ride, Junghsen Lieh
Ion Bombardment Induced Changes in Oxide-Metal Interactions Studied by Photoelectron Spectroscopy, Sharmila M. Mukhopadhyay and Tim C.S. Chen
Surface Properties of Perovskites and Their Response to Ion Bombardment, Sharmila M. Mukhopadhyay and Tim C.S. Chen
Deformation and Recrystallization of Nb-10Si In-Situ Composite, Mohammad Saqib, M. Thirukkonda, Brian Cockeram, and Raghavan Srinivasan
Computer Simulation of the Forging of Fine Grain IN-718 Alloy, Raghavan Srinivasan, V. Ramnarayan, U. Deshpande, V. Jain, and Isaac Weiss
Intermediate Shapes in Closed Die Forging By the Backward Deformation Optimization Method (BDOM), Raghavan Srinivasan, G. H. K. Reddy, S. S. Kumar, and Ramana V. Grandhi
High Temperature Deformation of the Near Beta Ti-15V-3Cr-3Sn-3Al Alloy, Raghavan Srinivasan and Isaac Weiss
Stability and Flow Localization During Compression of a Flow Softening Material, M. Thirukkonda, Raghavan Srinivasan, and Isaac Weiss
Submissions from 1992
Preparation of TEM Foils from Nb-10 a/o Si, Brian Cockeram, Ralph E. Omlor, Raghavan Srinivasan, Isaac Weiss, and A. G. Jackson
Role of Nb3Si in High Temperature Deformation of a Cast Nb - 10 a/o Si In-Situ Composite, Brian Cockeram, Mohammad Saqib, Raghavan Srinivasan, and Isaac Weiss
The Effect of Nb3Si Precipitates on the Deformation of the Primary Nb Phase in Nb-10 a/o Si In-Situ Composite, Brian Cockeram, Raghavan Srinivasan, and Isaac Weiss
Optimum Design of Forging Die Shapes for Nonlinear Material Deformation, C. Han, Ramana V. Grandhi, and Raghavan Srinivasan
Synchroshear of Laves Phases, P. M. Hazzledine, K. S. Kumar, Daniel B. Miracle, and A. G. Jackson
Characterization of the Phases Present in a Ti-45a/oAl-10a/oNB Alloy, A. G. Jackson and D. S. Lee
An Alternative Method for Formulating Closed-Form Dynamics for Elastic Mechanical Systems Using Symbolic Process, Junghsen Lieh
Damping Control of Ride Quality for Flexible Vehicle, Junghsen Lieh
Optimal Damping Control of Second-Order Dynamic Systems With Cross Effect in the Performance Index, Junghsen Lieh
Semi-Active Damping Control of Vehicle Ride, Junghsen Lieh
Multibody Dynamics for Biomechanical Systems, Junghsen Lieh, Mary M. Rodgers, Srinivas Tummarakota, and D. R. Schrag
Finite Element Analysis of Structural Systems Using Symbolic Process, Junghsen Lieh and Srinivas Tummarakota
Understanding Surface Activity of Oxides from Oxide-Metal Interface Formation, Sharmila M. Mukhopadhyay and Tim C.S. Chen
Ordering Transformations in the Nb3Si Phase in Nb-10Si Alloy, Mohammad Saqib, Raghavan Srinivasan, and Isaac Weiss
Yield Points During the High Temperature Deformation of Ti-15V-3Al-3Cr-3Sn Alloy, Raghavan Srinivasan
The Workability of "XD" Titanium Aluminide Alloys With Low Volume Fractions of TiB2, Angela Szaruga, Lisa Rothenflue, Raghavan Srinivasan, and Harry A. Lipsitt
Flow Softening During High Temperature Deformation of Nb-10 a/o Si In-Situ Composite, M. Thirukkonda, Brian Cockeram, Mohammad Saqib, L. E. Matson, Raghavan Srinivasan, and Isaac Weiss
Submissions from 1991
Phase Relationships in Nb - 18.7 a/o Si In-Situ Composite, Brian Cockeram, Harry A. Lipsitt, Raghavan Srinivasan, and Isaac Weiss
Characterization of Silicide Precipitates in Primary Nb Phase in Nb-10% Si In-Situ Composites, Brian Cockeram, Mohammad Saqib, Ralph E. Omlor, Raghavan Srinivasan, and Isaac Weiss
Handbook of Crystallography: For Electron Microscopists and Others, A. G. Jackson
A Design Approach for Intermediate Die Shapes in Plane Strain Forgings, S. S. Lanka, Raghavan Srinivasan, and Ramana V. Grandhi
An Alternative Method To Formulate Closed-Form Dynamics for Elastic Manipulators Using Symbolic Process, Junghsen Lieh
Computer-Aided Modeling and Control of Multibody Systems for Robotics Application, Junghsen Lieh
Control of Vibrations in Elastic Vehicles Using Saturation Nonlinear Semiactive Dampers, Junghsen Lieh
Modeling and Simulation of an Elastic Vehicle With Semiactive Suspensions, Junghsen Lieh
A Closed-Form Formalism for Controlled and Hybrid Rigid/Elastic Multibody Systems: Part II — Symbolic Implementation and Applications, Junghsen Lieh and Imitiaz Haque
A Study of the Parametrically Excited Behavior of Passenger and Freight Railway Vehicles Using Linear Models, Junghsen Lieh and Imitiaz Haque
A Closed-Form Formalism for Controlled and Hybrid Rigid/Elastic Multibody Systems: Part I — Formulation A Closed-Form Formalism for Controlled and Hybrid Rigid/Elastic Multibody Systems: Part I — Formulation, Junghsen Lieh and Imtiaz Haque
Modeling and Dynamic Analysis of a Slider-Crank Mechanism With Flexible Coupler and Joint, Junghsen Lieh and Imtiaz Haque
Semiactive Control of Vibrations in Automobiles, Junghsen Lieh and Imtiaz Haque
Symbolic Closed-Form Modeling and Linearization of Multibody Systems Subject to Control, Junghsen Lieh and Imtiaz ul Haque
Long Range Space Charge Effects at Ceramic Interfaces, Sharmila M. Mukhopadhyay
Ionic Double Layers at the Surface of Mg-doped Aluminum Oxide: Its Effect on Segregation Properties, Sharmila M. Mukhopadhyay and Jack M. Blakely
Role of Surface Defects in Metal-Ceramic Bonding”, Structure and Properties of Interfaces in Materials, Sharmila M. Mukhopadhyay and C. S. Chen
Computer Simulation of the Forging of Fine Grain IN-718 Alloy, Raghavan Srinivasan, V. Ramnarayan, U. Deshpande, V. Jain, and Isaac Weiss
Characterization of Rapidly Solidified Ti3Al Base Alloys, G. Venketaraman, A. G. Jackson, K. R. Teal, F. H. Froes, and David C. Liptak
Submissions from 1990
Identification of the Laue Zone Number in HCP Systems in Convergent Beam Electron Diffraction, A. G. Jackson
Symbolic Dynamics and Control Analysis of Elastic Vehicles With Active Suspensions, Junghsen Lieh and Imtiaz Haque
Surface Studies of TiO2-SiO2 Glasses by X-Ray Photoelectron Spectroscopy, Sharmila M. Mukhopadhyay and Stephen H. Garofalini
Extrusion Through Controlled Strain Rate Dies, Raghavan Srinivasan, J. S. Gunasekera, H. L. Gegel, and S. M. Doraivelu
Formation of Surface Depressions During Hot Isostatic Pressing (HIP), Raghavan Srinivasan and Isaac Weiss
The 'Processing Window' Concept for Beta Titanium Alloys, Isaac Weiss and Raghavan Srinivasan
