Submissions from 2006
Scaling Up of Equal Channel Angular Pressing (ECAP) for the Production of Forging Stock, Raghavan Srinivasan, Balakrishna Cherukuri, and Prabir K. Chaudhury
Fabrication of Thin Films of Multi-Cation Oxides (YBa2Cu3O7-delta) Starting from Nanoparticles of Mixed Ions, Jianhua Su, V. Chintamaneni, Sharmila M. Mukhopadhyay, R. R. Revur, T. Pyles, and S. Sengupta
Titanium Alloyed with Boron, Seshacharyulu Tamirisakandala, Daniel B. Miracle, Raghavan Srinivasan, and Jay S. Gunasekera
Effect of Finite-Length Casing Treatment on Cascade Aero-Elastic Stability, Zifeng Yang, Xiao Yu Wang, and Xiao Feng Sun
Submissions from 2005
Raman Spectroscopy Investigations of Functionally Graded Materials and Inter-Granular Mechanics, Maher S. Amer
Femtosecond versus Nanosecond Laser Machining: Comparison of Induced Stresses and Structural Changes in Silicon Wafers, Maher S. Amer, Mostafa M. El-Ashry, Larry R. Dosser, K. E. Hix, John F. Maguire, and Bryan Irwin
Calculations of the Raman Spectra of C60 Interacting with Water Molecules, Maher S. Amer, James A. Elliott, John F. Maguire, and Allan H. Windle
Method of Reducing Internal Stress in Materials, Maher S. Amer and John F. Maguire
Raman-Based Nanostructured Sensors, Maher S. Amer and John F. Maguire
Scaling Up of Equal-Channel Angular Pressing and Its Effect on Mechanical Properties, Microstructure, and Hot Workability of AA 6061, Prabir K. Chaudhury, Balakrishna Cherukuri, and Raghavan Srinivasan
A Comparison of the Properties of SPD-Processed AA-6061 By Equal-Channel Angular Pressing, Multi-Axial Compressions/Forgings and Accumulative Roll Bonding, Balakrishna Cherukuri, Teodora S. Nedkova, and Raghavan Srinivasan
Acceleration of Precipitation Process in AA6061 after Severe Plastic Deformation (SPD), Balakrishna Cherukuri, Raghavan Srinivasan, and Prabir K. Chaudhury
A Study of the Pressure Dependence of the Raman Spectrum of C60 and Single-Walled Nanotubes in Methanol-Water Mixtures, Mostafa M. El-Ashry, Maher S. Amer, and John F. Maguire
Laser Fabrication and Characterization of Sub-Millimeter Joints between Polyimide and Ti-coated Borosilicate Glass, Daniel Georgiev, Taslema Sultana, Ahsan Mian, Greg Auner, Hans Herfurth, Reiner Witte, and Golam Newaz
Local Dielectric and Strain Measurements in YBa2Cu3O7−δ Thin Films by Evanescent Microscopy and Raman Spectroscopy, Richard A. Kleismit, Mostafa M. El-Ashry, Gregory Kozlowski, Maher S. Amer, Marian K. Kazimierczuk, and Rand R. Biggers
Laser Bonded Microjoints between Titanium and Polyimide for Applications in Medical Implants, Ahsan Mian, L. Vendra, N. Rahman, Daniel Georgiev, Greg Auner, Reiner Witte, and Hans Herfurth
Surface Engineering Issues in Nanomaterials, Sharmila M. Mukhopadhyay, Pratik Joshi, and Rajasekhar Pulikollu
Thin Films for Coating Nanomaterials, Sharmila M. Mukhopadhyay, Pratik Joshi, and Rajasekhar Pulikollu
Comparison of YBCO Thin Films Fabricated using Different Approaches, Sharmila M. Mukhopadhyay, J. H. Su, V. Chintamaneni, S. Vemulakonda, and Pratik Joshi
Laser Fabrication and Characterization of Adhesive-Free Joints For Encapsulation of Biomedical Implant Devices, Golam Newaz, Daniel Georgiev, Ahsan Mian, Greg Auner, Hans Herfurth, and Reiner Witte
Slip Behavior in Liquid Films on Surfaces of Patterned Wettability: Comparison Between Continuum and Molecular Dynamics Simulations, Nikolai V. Priezjev, Anton A. Darhuber, and Sandra M. Troian
Vibrational Behavior of the Mn+1AXn Phases from First-Order Raman Scattering (M=Ti,V,Cr, A=Si, X=C,N), Jonathan E. Spanier, Surojit Gupta, Maher S. Amer, and Michel W. Barsoum
Temperature Changes and Loads During Hot-Die Forging of a Gamma Titanium–Aluminide Alloy, Raghavan Srinivasan, Mahendramohan Balathandayuthapani, and Wenying Yan
Coextrusion, Raghavan Srinivasan and C. S. Hartley
The Influence of the Heating Rate on YBCO Films Prepared by the Trifluoroacetate Metal-Organic Deposition Process, Jianhua Su, Pratik Joshi, V. Chintamaneni, and Sharmila M. Mukhopadhyay
Copper Metallic Substrates for High Temperature Superconducting Coated Conductors, Nicholas A. Yust, Rama Nekkanti, Lyle B. Brunke, Raghavan Srinivasan, and Paul N. Barnes
Unsteady Tip Leakage, Bow Shock, IGV Wake Interaction in a Compressor, Xuedong Zhou and J. Mitch Wolff
Submissions from 2004
Numerical Study of Random Superconductors, N. Akino, C. Giadina, J. M. Kosterlitz, and Nikolai V. Priezjev
Study of the Hydrostatic Pressure Dependence of the Raman Spectrum of Single-Walled Carbon Nanotubes and Nanospheres, Maher S. Amer, Mostafa M. El-Ashry, and John F. Maguire
AC Loss and XPS Issues of YBCO Coated Conductors, Paul N. Barnes, Timothy J. Haugan, J. T. Grant, Sharmila M. Mukhopadhyay, Cam Cobb, M. Sumption, and Justin C. Tolliver
Laser Micro-joining of Dissimilar and Biocompatible Materials, Ingo Bauer, Ulrich A. Russek, Hans Herfurth, Reiner Witte, S. Heinemann, Golam Newaz, Ahsan Mian, Daniel Georgiev, and Greg Auner
Joining Challenges in the Packaging of BioMEMS, Hans Herfurth, Reiner Witte, S. Heinemann, Golam Newaz, Ahsan Mian, Daniel Georgiev, and Greg Auner
Fatigue Damage Detection In Graphite/Epoxy Composites Using Sonic Infrared Imaging Technique, Ahsan Mian, Xiaoyan Han, Sarwar Islam, and Golam Newaz
Response of Subsurface Fatigue Damage under Sonic Load – A Computational Study, Ahsan Mian, Golam Newaz, Xiaoyan Han, and Chinmoy Saha
High Strain Rate Behavior of Partially Fatigued Nanocomposites, Ahsan Mian, Golam Newaz, T. Mahmood, and H. Mahfuz
Role of Defects on Mechanical Response of Nafion® Membranes for Fuel Cell Applications, Ahsan Mian, Golam Newaz, L. Vendra, Xin Wu, and Sheng Liu
Science & Engineering of Carbon Core Structures: Surface Engineering Issues, Sharmila M. Mukhopadhyay
Surface Modification of a Microcellular Porous Solid: Carbon Foam, Sharmila M. Mukhopadhyay, Rajasekhar V. Pulikollu, and A. K. Roy
Surfaces and Interfaces in Nanostructured Materials and Trends in LIGA, Miniaturization, and Nanoscale Materials: Fifth MPMD Global Innovations Symposium, Sharmila M. Mukhopadhyay, Sudipta Seal, Narendra B. Dahotre, Arvind Agarwal, John E. Smugeresky, and Neville Moody
Molecular Origin and Dynamic Behavior of Slip in Sheared Polymer Films, Nikolai V. Priezjev and Sandra M. Troian
Analysis and Characterization of Adhesively Bonded Mg-Steel Lap Joints, N. Rahman, Ahsan Mian, and Golam Newaz
Studies on YBa2NbO6 and YBa2Cu3-xNbxOy Buffer Layers, S. Sathiraju, R. Wheeler, Paul N. Barnes, T. L. Peterson, Iman Maartense, A. L. Campbell, N. A. Yust, T. J. Haugan, Q. Jia, Paul Arendt, Sharmila M. Mukhopadhyay, and S. Vemulakonda
CFD Analysis of Unsteady Separated Transonic Oscillation Cascade Aerodynamics, Xuedong Zhou and J. Mitch Wolff
Submissions from 2003
Raman Investigation of Single Walled Carbon Nanotubes and Fullerene [60] Under High Hydrostatic Pressure, Maher S. Amer, Mostafa M. El-Ashry, and John F. Maguire
Optomechanical Properties of Stretched Polymer Dispersed Liquid Crystal Films for Scattering Polarizer Applications, Iciro Amimori, Nikolai V. Priezjev, Robert A. Pelcovits, and Gregory P. Crawford
Raman Investigation of Fullerene [60] under Hydrostatic Pressure, Mostafa M. El-Ashry, Maher S. Amer, and John F. Maguire
Sensing Surface Phase Transitions on Fullerene C60 Nanospheres in Water-Ethanol Mixture, Mostafa M. El-Ashry, Maher S. Amer, and John F. Maguire
Exploring Two-Dimensional Soap-Foam Films using Fullerene (C60) Nanosensors, John F. Maguire, Maher S. Amer, and John D. Busbee
Sample Preparation for Microscope and Spectroscopic Characterization of Solid Surfaces and Films, Sharmila M. Mukhopadhyay
Correlation Between the XPS Peak Shapes of Y1Bu2Cu3O7-x and Film Quality, Sharmila M. Mukhopadhyay, Paul N. Barnes, Timothy J. Haugan, Swaminathan Krishnaswami, Justin C. Tolliver, and Iman Maartense
Surface Modification of Graphitic Foam, Sharmila M. Mukhopadhyay, Rajasekhar Pulikollu, Erik Ripberger, and A. K. Roy
Surface Engineering Issues in Composite Core Structures, Sharmila M. Mukhopadhyay, Rajasekhar Pulikollu, and A. K. Roy
Tensile Properties of Nicalon Fiber-Reinforced Carbon Following Aerospace Turbine Engine Testing, J. L. Pierce, L. P. Zawada, and Raghavan Srinivasan
External and Intrinsic Anchoring in Nematic Liquid Crystals: A Monte Carlo Study, Nikolai V. Priezjev, G. Skacej, R. A. Pelcovits, and S. Zumer
Forging Studies With Severe Plastic Deformation Processed Aluminum Alloy 6061, Raghavan Srinivasan and Prabir K. Chaudhury
Stress Characterization of MEMS Microbridges by Micro-Raman Spectroscopy, Lavern A. Starman, J. A. Lott, Maher S. Amer, W. D. Cowan, and John D. Busbee
Geometry Analysis and Simulation in Shoe Centerless Grinding, Hong Zhang, Jungshen Lieh, David Yen, Xiaozhong Song, and Xiaojian Rui
Submissions from 2002
Induced Stresses and Structural Changes in Silicon Wafers as a Result of Laser Micro-Machining, Maher S. Amer, Larry R. Dosser, Steven Leclair, and John F. Maguire
Effect of Grain Orientation and Local Strain on the Quality of Polycrystalline YBa2Cu3O7 Superconductive Films, Maher S. Amer, John F. Maguire, Rand R. Biggers, and Steven Leclair
Correlation Between the XPS Peak Shapes of Y1Bu2Cu3O7-x and Film Quality, Paul N. Barnes, Sharmila M. Mukhopadhyay, Timothy J. Haugan, Swaminathan Krishnaswami, Justin C. Tolliver, and Iman Maartense
XPS Depth Profiling Studies of YBCO Layer on Buffered Substrates, Paul N. Barnes, Sharmila M. Mukhopadhyay, Rama Nekkanti, Timothy J. Haugan, Rand Biggers, and Iman Maartense
Microstructure Modeling and Prediction During Thermomechanical Processing, A. J. Beaudoin, Raghavan Srinivasan, and S. L. Semiatin
Strongly Screened Vortex Lattice Model with Disorder, C. Giardina', Nikolai V. Priezjev, and J. M. Kosterlitz
Model of Freedericksz Transition and Hysteresis Effect in Polymer Stabilized Nematic Liquid Crystal Configurations for Display Applications, Pavel A. Kossyrev, Jun Qi, Nikolai V. Priezjev, Robert A. Pelcovits, and Gregory A. Crawford
Virtual Surfaces, Director Domains and the Freedericksz Transition in Polymer Stabilized Nematic Liquid Crystals, Pavel A. Kossyrev, Jun Qi, Nikolai V. Priezjev, Robert A. Pelcovits, and Gregory P. Crawford
Plasma Assisted Surface Coating of Porous Solids, Sharmila M. Mukhopadhyay, Pratik Joshi, S. Datta, and J MacDaniel
Plasma Assisted Hydrophobic Coatings on Porous Materials: Influence of Plasma Parameters, Sharmila M. Mukhopadhyay, Pratik Joshi, S. Datta, J. G. Zhao, and P. France
Structural Investigation of Graphitic Foam, Sharmila M. Mukhopadhyay, Niraj Mahadev, Pratik Joshi, A. K. Roy, K. M. Kearns, and David P. Anderson
Large Area Surface Modification Induced by Parallel Operated MSE Sustained Glow Discharges, C. Penache, S. Datta, Sharmila M. Mukhopadhyay, A. Brauning-Demain, Pratik Joshi, O. Hohn, S. Schossler, T. Jahnke, and H. Schmidt-Bocking
Simulations of Nematic Liquid Crystals: Confined Geometries, Phase Transitions and Topological Defects, Nikolai V. Priezjev
Coarsening Dynamics of Biaxial Nematic Liquid Crystals, Nikolai V. Priezjev and Robert A. Pelcovits
Submissions from 2001
Micro-Raman Spectroscopy in Micromechanics; The Giant Awakes, Maher S. Amer
Effects of Processing Parameters on Axial Stiffness of Self-Reinforced Polyethylene Composites, Maher S. Amer and Sunil Ganapathiraju
Local Grain Orientation and Strain in Polycrystalline YBa2Cu3O7−δ Superconductor Thin Films Measured by Raman Spectroscopy, Maher S. Amer, John F. Maguire, L. Cai, Rand R. Biggers, and Steven Leclair
Optimization of Sandpaper Sol-Gel Surface Preparation, K. E. Huber, D. B. McCray, and Raghavan Srinivasan
High Temperature Deformation and Recrystallization Behavior of Ti-10V-2Fe-3Al, B. D. Joyce, S. L. Semiatin, and Raghavan Srinivasan
Analytical Traction and Propulsion Analysis, Junghsen Lieh
Distortion Minimization During Gas Quenching Process, Zhichao Li, Ramana V. Grandhi, and Raghavan Srinivasan
Optimum Design of Process Parameters to Minimize Distortion During Gas Quenching Process, Zhichao Li, Ramana V. Grandhi, and Raghavan Srinivasan
A Parametric Study of Dynamic Recrystallization Using the Monte Carlo Method, Rodney McLaughlin and Raghavan Srinivasan
Cluster Monte Carlo Simulations of the Nematic--Isotropic Transition, Nikolai V. Priezjev and Robert A. Pelcovits
Disclination Loop Behavior Near the Nematic-Isotropic Transition, Nikolai V. Priezjev and Robert A. Pelcovits
Transformation Kinetics and Diffusion Mechanisms of Boron in Discontinuously Reinforced Titanium Matrix Composites, C. A. Riviello, Daniel B. Miracle, and Raghavan Srinivasan
Introduction of Compressive Residual Stresses in Ti-6Al-4V Simulated Airfoils via Laser Shock Processing, M. J. Shepard, P. R. Smith, and Maher S. Amer
Computer Simulation of the Equichannel Angular Extrusion (ECAE) Process, Raghavan Srinivasan
A New Method for Testing the Abrasive Properties of Paper and Other Sheet Materials, Raghavan Srinivasan and G. Puttaswamygowda
Microstructure Modeling and Prediction During Thermomechanical Processing, Raghavan Srinivasan, S. L. Semiatin, Armand Beaudoin, Steven Fox, and Zhe Jin
MREF-ECM Process for Hard Passive Materials Surface Finishing, J. J. Sun, E. J. Taylor, and Raghavan Srinivasan
Submissions from 2000
Direct Observation of Intergranular Stress Fields in Polycrystalline Materials, Maher S. Amer and John F. Maguire
Utilizing Raman Spectroscopy for Stress Imaging in Mems Devices, John D. Busbee, Lavern A. Starman, Maher S. Amer, Jason C. Reber, W. D. Cowan, and John F. Maguire
Profiling of the SiO2 - SiC Interface Using X-ray Photoelectron Spectroscopy, R. N. Ghosh, S. Ezhilvalavan, B. Golding, Sharmila M. Mukhopadhyay, N. Mahadev, Pratik Joshi, M. K. Das, and J. A. Cooper Jr.
Quantified Conditions for Reduction of ESO Contamination during SiC Metalization, Gavin McDaniel, S. T. Fenstermaker, D. E. Walker, W. V. Lampert, Sharmila M. Mukhopadhyay, and P. H. Holloway
Electron-Stimulated Oxidation of Silicon Carbide, Gavin McDaniel, S. T. Fenstermaker, D. E. Walker, Sharmila M. Mukhopadhyay, W. V. Lampert, and P. H. Holloway
Microstructural Modeling of Metadynamic Recrystallization in Hot Working of IN 718 Superalloy, S. C. Medeiros, Y. V. R. K. Prasad, W. Garth Frazier, and Raghavan Srinivasan
Modeling Grain Size During Hot Working of IN 718, S. C. Medeiros, Y. V. R. K. Prasad, W. Garth Frazier, and Raghavan Srinivasan
Microstructural and Spectroscopic Analyses of a Strongly-Linked Joint Formed in a Superconductor, Sharmila M. Mukhopadhyay, N. Mahadev, and S. Sengupta
Dopant Enhanced Processing of Superconducting Perovskites, Sharmila M. Mukhopadhyay and S. Sengupta
Tensile Behavior of SiC/C and Rene'41 Following Isothermal Exposure and Thermal Fatigue, J. L. Pierce, L. P. Zawada, and Raghavan Srinivasan
Surface Extrapolation Length and Director Structures in Confined Nematics, Nikolai V. Priezjev and Robert A. Pelcovits
Residual Compression Stress Profile in High-Modulus Carbon Fiber Embedded in Isotactic Polypropylene by Micro-Raman Spectroscopy, H. D. Wagner, Maher S. Amer, and Linda S. Schadler
