Submissions from 2002
Coarsening Dynamics of Biaxial Nematic Liquid Crystals, Nikolai V. Priezjev and Robert A. Pelcovits
Submissions from 2001
Micro-Raman Spectroscopy in Micromechanics; The Giant Awakes, Maher S. Amer
Effects of Processing Parameters on Axial Stiffness of Self-Reinforced Polyethylene Composites, Maher S. Amer and Sunil Ganapathiraju
Local Grain Orientation and Strain in Polycrystalline YBa2Cu3O7−δ Superconductor Thin Films Measured by Raman Spectroscopy, Maher S. Amer, John F. Maguire, L. Cai, Rand R. Biggers, and Steven Leclair
Optimization of Sandpaper Sol-Gel Surface Preparation, K. E. Huber, D. B. McCray, and Raghavan Srinivasan
High Temperature Deformation and Recrystallization Behavior of Ti-10V-2Fe-3Al, B. D. Joyce, S. L. Semiatin, and Raghavan Srinivasan
Distortion Minimization During Gas Quenching Process, Zhichao Li, Ramana V. Grandhi, and Raghavan Srinivasan
Optimum Design of Process Parameters to Minimize Distortion During Gas Quenching Process, Zhichao Li, Ramana V. Grandhi, and Raghavan Srinivasan
A Parametric Study of Dynamic Recrystallization Using the Monte Carlo Method, Rodney McLaughlin and Raghavan Srinivasan
Cluster Monte Carlo Simulations of the Nematic--Isotropic Transition, Nikolai V. Priezjev and Robert A. Pelcovits
Disclination Loop Behavior Near the Nematic-Isotropic Transition, Nikolai V. Priezjev and Robert A. Pelcovits
Transformation Kinetics and Diffusion Mechanisms of Boron in Discontinuously Reinforced Titanium Matrix Composites, C. A. Riviello, Daniel B. Miracle, and Raghavan Srinivasan
Introduction of Compressive Residual Stresses in Ti-6Al-4V Simulated Airfoils via Laser Shock Processing, M. J. Shepard, P. R. Smith, and Maher S. Amer
Computer Simulation of the Equichannel Angular Extrusion (ECAE) Process, Raghavan Srinivasan
A New Method for Testing the Abrasive Properties of Paper and Other Sheet Materials, Raghavan Srinivasan and G. Puttaswamygowda
Microstructure Modeling and Prediction During Thermomechanical Processing, Raghavan Srinivasan, S. L. Semiatin, Armand Beaudoin, Steven Fox, and Zhe Jin
MREF-ECM Process for Hard Passive Materials Surface Finishing, J. J. Sun, E. J. Taylor, and Raghavan Srinivasan
Submissions from 2000
Direct Observation of Intergranular Stress Fields in Polycrystalline Materials, Maher S. Amer and John F. Maguire
Utilizing Raman Spectroscopy for Stress Imaging in Mems Devices, John D. Busbee, Lavern A. Starman, Maher S. Amer, Jason C. Reber, W. D. Cowan, and John F. Maguire
Profiling of the SiO2 - SiC Interface Using X-ray Photoelectron Spectroscopy, R. N. Ghosh, S. Ezhilvalavan, B. Golding, Sharmila M. Mukhopadhyay, N. Mahadev, Pratik Joshi, M. K. Das, and J. A. Cooper Jr.
Quantified Conditions for Reduction of ESO Contamination during SiC Metalization, Gavin McDaniel, S. T. Fenstermaker, D. E. Walker, W. V. Lampert, Sharmila M. Mukhopadhyay, and P. H. Holloway
Electron-Stimulated Oxidation of Silicon Carbide, Gavin McDaniel, S. T. Fenstermaker, D. E. Walker, Sharmila M. Mukhopadhyay, W. V. Lampert, and P. H. Holloway
Microstructural Modeling of Metadynamic Recrystallization in Hot Working of IN 718 Superalloy, S. C. Medeiros, Y. V. R. K. Prasad, W. Garth Frazier, and Raghavan Srinivasan
Modeling Grain Size During Hot Working of IN 718, S. C. Medeiros, Y. V. R. K. Prasad, W. Garth Frazier, and Raghavan Srinivasan
Microstructural and Spectroscopic Analyses of a Strongly-Linked Joint Formed in a Superconductor, Sharmila M. Mukhopadhyay, N. Mahadev, and S. Sengupta
Dopant Enhanced Processing of Superconducting Perovskites, Sharmila M. Mukhopadhyay and S. Sengupta
Tensile Behavior of SiC/C and Rene'41 Following Isothermal Exposure and Thermal Fatigue, J. L. Pierce, L. P. Zawada, and Raghavan Srinivasan
Surface Extrapolation Length and Director Structures in Confined Nematics, Nikolai V. Priezjev and Robert A. Pelcovits
Residual Compression Stress Profile in High-Modulus Carbon Fiber Embedded in Isotactic Polypropylene by Micro-Raman Spectroscopy, H. D. Wagner, Maher S. Amer, and Linda S. Schadler
Submissions from 1999
Tough C-C Composite Joints Easy to Machine, Maher S. Amer
Non-destructive, In situ Measurements of Diamond-Like-Carbon Film Hardness using Raman and Rayleigh Scattering, Maher S. Amer, John D. Busbee, Steven Leclair, John F. Maguire, J. Johns, and A. Voevodin
Functionally Graded Joints for Carbon/Carbon Composites: Micro-Raman Spectroscopy Characterization, Maher S. Amer, T. El-Raghy, Michel W. Barsoum, and Isaac Weiss
Functionally Graded Jolnts For Carbonicarbon Composites I. Micro-Raman Spectroscopy Characterization, Maher S. Amer, T. El-Raghy, Michel W. Barsoum, and Isaac Weiss
The Effect of Interphase Toughness on Fibre/Fibre Interaction in Graphite/Epoxy Composites: An Experimental and Modelling Study, Maher S. Amer and Linda S. Schadler
The Topotactic Transformation of Ti3SiC2 into a Partially Ordered Cubic Ti (C0.67Si0.06) Phase by the Diffusion of Si into Molten Cryolite, Michel W. Barsoum, T. El-Raghy, L. Farber, Maher S. Amer, R. Christini, and A. Adams
Measurement of Backside Flip Chip Die Stresses using Piezoresistive Test Die, R. Wayne Johnson, Ahsan Mian, Jeffrey C. Suhling, Richard C. Jaeger, and M. K. Rahim
Modeling Grain Size During Hot Deformation of IN 718, S. C. Medeiros, Y. V. R. K. Prasad, W. Garth Frazier, and Raghavan Srinivasan
Sensitivity of van der Pauw Stress Sensors to Uniaxial Stress, Ahsan Mian, Jeffrey C. Suhling, and Richard C. Jaeger
Theoretical and Experimental Analysis of VDP Sensors for Use in Die Stress Measurements, Ahsan Mian, Jeffrey C. Suhling, and Richard C. Jaeger
Influence of Surface Doping on Sintering and Microstructure of a Superconducting Oxide, Sharmila M. Mukhopadhyay, Roberto Garcia, and Niraj Mahadev
Synthesis of Bismuth-Strontium-Calcium-Copper Oxide powders for Silver Composite Wires with Uniform Micron Sized Filaments, S. Sengupta, E. Caprino, K. Card, J. R. Gaines Jr., L. R. Motowidlo, R. S. Sokolowski, R. Garcia, and Sharmila M. Mukhopadhyay
In-Situ Stress State Measurements During Chip-on-Board Assembly, Y. Zou, Jeffrey C. Suhling, R. W. Johnson, Richard C. Jaeger, and Ahsan Mian
Submissions from 1998
The Raman spectrum of Ti3SiC2, Maher S. Amer, Michel W. Barsoum, T. El-Raghy, Isaac Weiss, Steven Leclair, and D. Liptak
Micromechanical Behavior of Graphite/Epoxy Composites Part II: Interfacial Durability, Maher S. Amer and Linda S. Schadler
Micromechanical Behavior of Graphite/Epoxy Composites Part I: The Effect Of Fiber Sizing, Maher S. Amer and Linda S. Schadler
New Methodology for Determining in situ Fiber, Matrix and Interface Stresses in Damaged Multifiber Composites, Irene J. Beyerlein, Maher S. Amer, Linda S. Schadler, and S. Leigh Phoenix
Rough Sets Applied to the Discovery of Materials Knowledge, A. G. Jackson, Z. Pawlak, and S. R. LeClair
Finite Element Study of the Fiber-Matrix Interface Behavior of [10°/90°] Laminated Composites Under Tensile Loading, H. Mahfuz, Ahsan Mian, U. Vaidya, T. Brown, and S. Jeelani
Interaction of Bromine with Y1Ba2Cu3O7-x: Its Role as a Dopant and an Etchant, Sharmila M. Mukhopadhyay and Chao Wei
Three-Dimensional Dynamic Analysis of Wheelchair Propulsion, Mary M. Rodgers, Srinivas Tummarakota, and Junghsen Lieh
FET and VDP Stress Sensors for Experimental Characterization of Die Stress in Electronic Packages, Jeffrey C. Suhling, Richard C. Jaeger, Arthur T. Bradley, and Ahsan Mian
Submissions from 1997
Stress Concentration Phenomenon in Graphite/Epoxy Composites: Tension/Compression Effects, Maher S. Amer and Linda S. Schadler
In Vitro Characterization of a Zinc Based Bioceramic, William Guy Billotte, D. B. Reynolds, G. M. Mehrotra, Raghavan Srinivasan, and P. K. Bajpai
Finding Compound Property Patterns in Empirical Data Sets using Discovery Methods, A. G. Jackson and N. Kiselyova
Spectroscopic Methods for Control of Thin Film Growth, A. G. Jackson, S. J. P. Laube, and J. Jones
Relationship of the Second Order Nonlinear Optical Coefficient to Energy Gap in Inorganic Non-centrosymmetric Crystals, A. G. Jackson, M. C. Ohmer, and S. R. LeClair
Hydrostatic Response of Piezoresistive Stress Sensors, Y. Kang, Ahsan Mian, Jeffrey C. Suhling, Richard C. Jaeger, K. M. Liechti, and S. Liu
Raman Spectroscopy for Determining YBCO Thin Film Paramters In situ, David P. Lubbers, John D. Busbee, A. G. Jackson, and Rand R. Biggers
Optimization of Microstructure Development During Hot Working Using Control Theory, James C. Malas III, W. Garth Frazier, S. Venugopal, Enrique A. Medina, Steven Madeiros, Raghavan Srinivasan, R. Dennis Irwin, W. M. Mullins, and Anil Chaudhary
Evaluation of Die Stress Using van der Pauw Sensors, Ahsan Mian, Jeffrey C. Suhling, Richard C. Jaeger, and B. M. Wilamowski
Comparing the Surface Activity of Compounds Using an Elemental Adsorbate, Sharmila M. Mukhopadhyay
Cold Formability of Timetal® 21S Sheet Material, J. Reshad, Isaac Weiss, Raghavan Srinivasan, T. F. Broderick, and S. L. Semiatin
Application of the Monte Carlo Method to the Dissolution of a Polycrystalline Solid, Raghavan Srinivasan
Design and Calibration of Optimized (111) Silicon Stress Sensing Test Chips, Jeffrey C. Suhling, Richard C. Jaeger, Shun-Tien Lin, Ahsan Mian, Robert A. Cordes, and B. M. Wilamowski
Optimization of Microstructure Development During Deformation Processing Using Control Theory Principles, S. Venugopal, Enrique A. Medina, James C. Malas III, S. C. Medeiros, W. Garth Frazier, W. M. Mullins, and Raghavan Srinivasan
Advances in the Science and Technology of Titanium Alloy Processing: Proceedings of an International Symposium Sponsored by the TMS Titanium and Shaping and Forming Held at the 125th TMS Annual Meeting and Exhibition in Anaheim, California, February 5-8, 1996, Isaac Weiss, Raghavan Srinivasan, P. J. Bania, D. Eylon, and S. L. Semiatin
Cold and Warm Working of LCB Titanium Alloy, Isaac Weiss, Raghavan Srinivasan, Mohammad Saqib, N. Stefansson, A. G. Jackson, and S. R. LeClair
Submissions from 1996
Relating Hydrothermal Degradation in Single Fibre Composites to Degradation Behaviour in Bulk Composites, Maher S. Amer, M. J. Koczak, and Linda S. Schadler
Effect of Hydrothermal Exposure on Interfacial Stress Transfer in Graphite/Epoxy Composites Loaded in Compression, Maher S. Amer and Linda S. Schadler
Sensor Principles and Methods for Measuring Physical Properties, A. G. Jackson, S. J. P. Laube, and J. Busbee
Electronic Prototyping: Toward Future Applications of Sensors in Materials Processing, S. R. LeClair, A. G. Jackson, M. D. Benedict, D. M. Conrad, and Y. Cao
Optimization of Microstructure Development: Application to Hot Metal Extrusion, James C. Malas III, Anil Chaudhary, W. M. Mullins, Enrique A. Medina, S. Venugopal, S. C. Medeiros, R. Dennis Irwin, W. Garth Frazier, and Raghavan Srinivasan
Optimization of Microstructure Development: Application to Hot Metal Extrusion, Enrique A. Medina, S. Venugopal, W. Garth Frazier, S. C. Medeiros, W. M. Mullins, Anil Chaudhary, R. Dennis Irwin, Raghavan Srinivasan, and James C. Malas III
Design, Calibration, and Application of Optimized (111) Silicon Stress Sensing Test Chips, Ahsan Mian, Robert A. Cordes, B. M. Wilamowski, S. Lin, Jeffrey C. Suhling, and Richard C. Jaeger
Experimental Measurement of Fiber/Fiber Interaction using Micro Raman Spectroscopy, Linda S. Schadler, Maher S. Amer, and B. Iskandarani
Isothermal Deformation of Gamma Titanium Aluminide, Raghavan Srinivasan, J. P. Singh, E. Tuval, and Isaac Weiss
Fibre Interactions in Two-Dimensional Composites by Micro-Raman Spectroscopy, H. D. Wagner, Maher S. Amer, and Linda S. Schadler
Role of Halogen Dopants in Ag-Y1Ba2Cu3O(7-x) Composites, Chao Wei and Sharmila M. Mukhopadhyay
A Systems Approach to Flame Retardancy and Comments on Mode of Action, Edward D. Weil, Weiming Zhu, Navin Patel, and Sharmila M. Mukhopadhyay
Bulk Deformation of Ti-6.8Mo-4.5Fe-1.5Al (Timetal LCB) Alloy, Isaac Weiss, Raghavan Srinivasan, Mohammad Saqib, N. Stefansson, A. G. Jackson, and S. R. LeClair
Intumescent flame-retardant system of phosphates and 5,5,5′,5′,5″,5″-hexamethyltris (1,3,2-dioxaphosphorinanemethan)amine 2,2′,2″- trioxide for polyolefins, Weiming Zhu, Edward D. Weil, and Sharmila M. Mukhopadhyay
Submissions from 1995
Environmental Degradation of the Interface in Graphite/Epoxy Single Filament Composites Measured using Raman Spectroscopy: Effect of Hydrothermal and Thermal Exposure at 100°C, Maher S. Amer, M. J. Koczak, and Linda S. Schadler
Metallization of Electronic Polymers: A Comparative Study of Polyvinylidene Fluoride, Polytetrafluoroethylene, and Polyethylene, Tim C.S. Chen and Sharmila M. Mukhopadhyay
Relationship of the Second Order Nonlinear Optical Coefficient to Bandgap in Inorganic Non-Centrosymmetric Crystals, A. G. Jackson, M. Ohmer, and S. R. Leclair
Window-On-Europe, S. R. LeClair and A. G. Jackson
Study of the Interface Behavior of SiCf/Si3N4 Composites Using a 3-D Unit Cell Model, H. Mahfuz, Ahsan Mian, S. Jeelani, U. Vaidya, and T. Brown
Prediction of Fiber-Matrix Interface Failure Due to Longitudinal Tensile Loading using Finite Element Methods, H. Mahfuz, Ahsan Mian, U. Vaidya, and T. Brown
Non-Isothermal Deformation of Gamma Titanium Aluminide, B. Mohan, Raghavan Srinivasan, and Isaac Weiss
Surface Chemical states of Barium Titanate: Influence of Sample Processing, Sharmila M. Mukhopadhyay and Tim C. S. Chen
Interaction of PbZrxTi(1-x)O3 (PZT) with Ni: Role of Surface Defects, Sharmila M. Mukhopadhyay and Tim C.S. Chen
Interactions at the Superconductor-Metal Interface, Sharmila M. Mukhopadhyay, Chao Wei, and Tim C.S. Chen
Environmental Effects on Interfacial Behavior in Graphite/Epoxy Single-Fiber and Multi-Fibers Composites, Linda S. Schadler, M. J. Koczak, and Maher S. Amer
Isothermal Deformation of Gamma Titanium Aluminide, J. P. Singh, E. Tuval, Isaac Weiss, and Raghavan Srinivasan
Ductile Phase Toughening in the Nb-10Si In-Situ Composite, Raghavan Srinivasan and Isaac Weiss
Submissions from 1994
Environmental Degradation Studies of the Interface in Single-Filament Graphite/Epoxy Composites Using Laser Raman Spectroscopy, Maher S. Amer, M. J. Koczak, C. Galiotis, and Linda S. Schadler
Integration of Simulation and Analysis of Electron Diffraction Patterns, A. G. Jackson and S. R. LeClair
Intermediate Shapes in Closed-Die Forging By the Backward Deformation Optimization Method (BDOM), Raghavan Srinivasan, G. H. K. Reddy, S. S. Kumar, and Ramana V. Grandhi
Deformation Processing of the Nb-10 a/o Si In-Situ Composite, Raghavan Srinivasan, M. Thirukkonda, and Isaac Weiss
High Temperature Deformation of Nb-10 a/o Si In-Situ Composite, M. Thirukkonda, Raghavan Srinivasan, and Isaac Weiss
Instability and Flow Localization During Compression of a Flow Softening Material, M. Thlrukkonda, Raghavan Srinivasan, and Isaac Weiss